No I mean use SNMP to get all the stations on an AP. Then hit all of those IPs with a deregister so they're forced to reassociate.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Nov 2, 2015 6:47 PM, "Nate Burke" <n...@blastcomm.com> wrote: > Well, Yes, SNMP Tells me what AP they're supposed to be on, and that > they've moved, but now you have to cross reference the SM list on multiple > AP's to see which one's you need to kick. VS logging into the Problem SM > and re-scanning. > > Although Maybe you're right. Dealing with just 1 EPMP GUI on the AP may > offset dealing with the EPMP GUI on multiple SM's :-) > > > On 11/2/2015 5:43 PM, Josh Luthman wrote: > > SNMP all of them? > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > On Nov 2, 2015 6:33 PM, "Nate Burke" <n...@blastcomm.com> wrote: > >> Dang, I was hoping there was a better way! It's just a pain when you >> have an AP reboot (or momentarily lose Sync), and suddenly 15 people end up >> on the Wrong APs, and you have to go sort them out from the multiple AP's >> they jumped to instead of just logging into the SM. I've also found that >> if you Kick someone off of their strongest AP, they'll associate a >> different AP, not rescan again for the one that just kicked them even >> though it's the strongest. >> >> >> On 11/2/2015 5:25 PM, Josh Luthman wrote: >> >> Sorry - what Dan said. >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> On Nov 2, 2015 6:24 PM, "Dan Sullivan" < >> daniel.sulli...@cambiumnetworks.com> wrote: >> >>> Hi Nate, >>> >>> >>> >>> You can go to the AP to which the SM is currently registered and select >>> Monitor -> Wireless. In the list of registered SMs will be your SM. You >>> select “Deregister” and the SM will search for an AP again. >>> >>> >>> >>> Preferred AP is used when the SM is doing network entry. The SM scans >>> and identifies all APs that it sees. Then the SM uses the Preferred AP >>> upon the APs found during scanning. >>> >>> >>> >>> Dan Sullivan >>> >>> ePMP Software Manager >>> >>> >>> >>> *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Josh Luthman >>> *Sent:* Monday, November 02, 2015 5:17 PM >>> *To:* af@afmug.com >>> *Subject:* Re: [AFMUG] EPMP Rescan >>> >>> >>> >>> On monitor wireless click rescan? >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Nov 2, 2015 6:13 PM, "Nate Burke" <n...@blastcomm.com> wrote: >>> >>> I could just be overlooking it, but is there a way to rescan an EPMP Sm >>> if it's associated to the wrong sector? Or is Rebooting the SM or Kicking >>> it from the Wrong AP the only way? >>> >>> Does the 'Preferred AP' Only matter when the radio is initially scanning? >>> >>> >> >