Dang, I was hoping there was a better way! It's just a pain when you
have an AP reboot (or momentarily lose Sync), and suddenly 15 people end
up on the Wrong APs, and you have to go sort them out from the multiple
AP's they jumped to instead of just logging into the SM. I've also
found that if you Kick someone off of their strongest AP, they'll
associate a different AP, not rescan again for the one that just kicked
them even though it's the strongest.
On 11/2/2015 5:25 PM, Josh Luthman wrote:
Sorry - what Dan said.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Nov 2, 2015 6:24 PM, "Dan Sullivan"
<daniel.sulli...@cambiumnetworks.com
<mailto:daniel.sulli...@cambiumnetworks.com>> wrote:
Hi Nate,
You can go to the AP to which the SM is currently registered and
select Monitor -> Wireless. In the list of registered SMs will be
your SM. You select “Deregister” and the SM will search for an AP
again.
Preferred AP is used when the SM is doing network entry. The SM
scans and identifies all APs that it sees. Then the SM uses the
Preferred AP upon the APs found during scanning.
Dan Sullivan
ePMP Software Manager
*From:*Af [mailto:af-boun...@afmug.com
<mailto:af-boun...@afmug.com>] *On Behalf Of *Josh Luthman
*Sent:* Monday, November 02, 2015 5:17 PM
*To:* af@afmug.com <mailto:af@afmug.com>
*Subject:* Re: [AFMUG] EPMP Rescan
On monitor wireless click rescan?
Josh Luthman
Office: 937-552-2340 <tel:937-552-2340>
Direct: 937-552-2343 <tel:937-552-2343>
1100 Wayne St
Suite 1337
Troy, OH 45373
On Nov 2, 2015 6:13 PM, "Nate Burke" <n...@blastcomm.com
<mailto:n...@blastcomm.com>> wrote:
I could just be overlooking it, but is there a way to rescan
an EPMP Sm if it's associated to the wrong sector? Or is
Rebooting the SM or Kicking it from the Wrong AP the only way?
Does the 'Preferred AP' Only matter when the radio is
initially scanning?