You could do something like this. The model pictured is a 1036.
On Sat, Jan 2, 2016 at 11:32 PM, Ken Hohhof <af...@kwisp.com> wrote: > Looks like I remembered wrong, 125 watts, $3050. > http://routerboard.com/CCR1072-1G-8Splus > > > *From:* Scott Vander Dussen <sc...@velociter.net> > *Sent:* Saturday, January 02, 2016 10:08 PM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] +48VDC to 24VDC > > Close, it's the 256 core version is 72W, $895 MSRP. > > Thanks, > `S > > --- > Sent mobile, typed by thumbs. > > On Jan 2, 2016, at 16:59, Ken Hohhof <af...@kwisp.com> wrote: > > The 72 core version is something like 250 watts, isn’t it? > > *From:* Scott Vander Dussen <sc...@velociter.net> > *Sent:* Saturday, January 02, 2016 6:55 PM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] +48VDC to 24VDC > > Well, it doesn't have PoE in, but I also don't have a PoE device there, > it's just the CCR1016-12S-1S+ by itself. But you're right, even 802.11at > or PoE+ only supports 30W. This must he why MT does not support PoE-in on > the higher-end CCRs. > > Thanks, > 'S > > Sent mobile! > > On Jan 2, 2016, at 16:47, Ken Hohhof <af...@kwisp.com> wrote: > > Max power consumption 44 watts, so I guess you could power it via POE, but > it would have to be a high power POE. > > *From:* Scott Vander Dussen <sc...@velociter.net> > *Sent:* Saturday, January 02, 2016 6:37 PM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] +48VDC to 24VDC > > No copper ports, all SFP. :/ > > Instead of including a "free" copper transceiver I'd prefer one of the > ports as PoE-in copper like most of their other products. > > Thanks, > `S > > --- > Sent mobile, typed by thumbs. > > On Jan 2, 2016, at 16:27, TJ Trout <t...@voltbb.com> wrote: > > feed it poe > > On Sat, Jan 2, 2016 at 4:22 PM, George Skorup <geo...@cbcast.com> wrote: > >> Oh look, a new product! And MikroTik still didn't listen. Seriously, how >> f'n hard is it to listen to your customers for one, and two, at least make >> it easy to run these things straight off of DC. >> >> I have a 1016-12S-1S+ for a fiber project. It's pretty nice with the >> redundant power supplies. And if this project called for a DC plant, I'd be >> using something else. >> >> Anyway, I'm sure you could rip the AC-DC power supplies out and wire it >> up how you want. Or drill a couple holes and put some of those banana plug >> terminal things in I suppose. Too much work for me. >> >> On 1/2/2016 5:40 PM, Scott Vander Dussen wrote: >> >> With a +48vdc power source would it make sense to power a CCR1016-12S-1S+ >> <http://routerboard.com/CCR1016-12S-1Splus> by opening the case, >> bypassing the AC power supplies, and connecting a TRACO Power TCL 060-124 >> <http://www.mouser.com/ProductDetail/TRACO-Power/TCL-060-124/?qs=ckJk83FOD0WMJFH7E7aMOQ%3D%3D> >> directly to the routerboard? Is there an easier more efficient way? >> Trying to avoid using AC at all, thanks. >> >> >> > >