I'm not exactly sure. Somebody posted this on Facebook. On Mon, Jan 4, 2016 at 8:21 AM, David Milholen <dmilho...@wletc.com> wrote:
> Josh, > Where and what are the parts used in this pic? > > > On 1/3/2016 9:15 AM, Josh Baird wrote: > > You could do something like this. The model pictured is a 1036. > > > On Sat, Jan 2, 2016 at 11:32 PM, Ken Hohhof <af...@kwisp.com> wrote: > >> Looks like I remembered wrong, 125 watts, $3050. >> http://routerboard.com/CCR1072-1G-8Splus >> >> >> *From:* Scott Vander Dussen <sc...@velociter.net> >> *Sent:* Saturday, January 02, 2016 10:08 PM >> *To:* af@afmug.com >> *Subject:* Re: [AFMUG] +48VDC to 24VDC >> >> Close, it's the 256 core version is 72W, $895 MSRP. >> >> Thanks, >> `S >> >> --- >> Sent mobile, typed by thumbs. >> >> On Jan 2, 2016, at 16:59, Ken Hohhof < <af...@kwisp.com>af...@kwisp.com> >> wrote: >> >> The 72 core version is something like 250 watts, isn’t it? >> >> *From:* Scott Vander Dussen <sc...@velociter.net> >> *Sent:* Saturday, January 02, 2016 6:55 PM >> *To:* <af@afmug.com>af@afmug.com >> *Subject:* Re: [AFMUG] +48VDC to 24VDC >> >> Well, it doesn't have PoE in, but I also don't have a PoE device there, >> it's just the CCR1016-12S-1S+ by itself. But you're right, even >> 802.11at or PoE+ only supports 30W. This must he why MT does not support >> PoE-in on the higher-end CCRs. >> >> Thanks, >> 'S >> >> Sent mobile! >> >> On Jan 2, 2016, at 16:47, Ken Hohhof <af...@kwisp.com> wrote: >> >> Max power consumption 44 watts, so I guess you could power it via POE, >> but it would have to be a high power POE. >> >> *From:* Scott Vander Dussen <sc...@velociter.net> >> *Sent:* Saturday, January 02, 2016 6:37 PM >> *To:* <af@afmug.com>af@afmug.com >> *Subject:* Re: [AFMUG] +48VDC to 24VDC >> >> No copper ports, all SFP. :/ >> >> Instead of including a "free" copper transceiver I'd prefer one of the >> ports as PoE-in copper like most of their other products. >> >> Thanks, >> `S >> >> --- >> Sent mobile, typed by thumbs. >> >> On Jan 2, 2016, at 16:27, TJ Trout < <t...@voltbb.com>t...@voltbb.com> wrote: >> >> feed it poe >> >> On Sat, Jan 2, 2016 at 4:22 PM, George Skorup < <geo...@cbcast.com> >> geo...@cbcast.com> wrote: >> >>> Oh look, a new product! And MikroTik still didn't listen. Seriously, how >>> f'n hard is it to listen to your customers for one, and two, at least make >>> it easy to run these things straight off of DC. >>> >>> I have a 1016-12S-1S+ for a fiber project. It's pretty nice with the >>> redundant power supplies. And if this project called for a DC plant, I'd be >>> using something else. >>> >>> Anyway, I'm sure you could rip the AC-DC power supplies out and wire it >>> up how you want. Or drill a couple holes and put some of those banana plug >>> terminal things in I suppose. Too much work for me. >>> >>> On 1/2/2016 5:40 PM, Scott Vander Dussen wrote: >>> >>> With a +48vdc power source would it make sense to power a >>> CCR1016-12S-1S+ <http://routerboard.com/CCR1016-12S-1Splus> by opening >>> the case, bypassing the AC power supplies, and connecting a TRACO Power TCL >>> 060-124 >>> <http://www.mouser.com/ProductDetail/TRACO-Power/TCL-060-124/?qs=ckJk83FOD0WMJFH7E7aMOQ%3D%3D> >>> directly to the routerboard? Is there an easier more efficient way? >>> Trying to avoid using AC at all, thanks. >>> >>> >>> >> >> > > -- >