Josh,
Where and what are the parts used in this pic?
On 1/3/2016 9:15 AM, Josh Baird wrote:
You could do something like this. The model pictured is a 1036.
On Sat, Jan 2, 2016 at 11:32 PM, Ken Hohhof <af...@kwisp.com
<mailto:af...@kwisp.com>> wrote:
Looks like I remembered wrong, 125 watts, $3050.
http://routerboard.com/CCR1072-1G-8Splus
*From:* Scott Vander Dussen <mailto:sc...@velociter.net>
*Sent:* Saturday, January 02, 2016 10:08 PM
*To:* af@afmug.com <mailto:af@afmug.com>
*Subject:* Re: [AFMUG] +48VDC to 24VDC
Close, it's the 256 core version is 72W, $895 MSRP.
Thanks,
`S
---
Sent mobile, typed by thumbs.
On Jan 2, 2016, at 16:59, Ken Hohhof <af...@kwisp.com
<mailto:af...@kwisp.com>> wrote:
The 72 core version is something like 250 watts, isn’t it?
*From:* Scott Vander Dussen <mailto:sc...@velociter.net>
*Sent:* Saturday, January 02, 2016 6:55 PM
*To:* af@afmug.com <mailto:af@afmug.com>
*Subject:* Re: [AFMUG] +48VDC to 24VDC
Well, it doesn't have PoE in, but I also don't have a PoE device
there, it's just the CCR1016-12S-1S+ by itself. But you're
right, even 802.11at or PoE+ only supports 30W. This must he why
MT does not support PoE-in on the higher-end CCRs.
Thanks,
'S
Sent mobile!
On Jan 2, 2016, at 16:47, Ken Hohhof <af...@kwisp.com
<mailto:af...@kwisp.com>> wrote:
Max power consumption 44 watts, so I guess you could power it
via POE, but it would have to be a high power POE.
*From:* Scott Vander Dussen <mailto:sc...@velociter.net>
*Sent:* Saturday, January 02, 2016 6:37 PM
*To:* af@afmug.com <mailto:af@afmug.com>
*Subject:* Re: [AFMUG] +48VDC to 24VDC
No copper ports, all SFP. :/
Instead of including a "free" copper transceiver I'd prefer one
of the ports as PoE-in copper like most of their other products.
Thanks,
`S
---
Sent mobile, typed by thumbs.
On Jan 2, 2016, at 16:27, TJ Trout <t...@voltbb.com
<mailto:t...@voltbb.com>> wrote:
feed it poe
On Sat, Jan 2, 2016 at 4:22 PM, George Skorup
<geo...@cbcast.com <mailto:geo...@cbcast.com>> wrote:
Oh look, a new product! And MikroTik still didn't listen.
Seriously, how f'n hard is it to listen to your customers
for one, and two, at least make it easy to run these things
straight off of DC.
I have a 1016-12S-1S+ for a fiber project. It's pretty nice
with the redundant power supplies. And if this project
called for a DC plant, I'd be using something else.
Anyway, I'm sure you could rip the AC-DC power supplies out
and wire it up how you want. Or drill a couple holes and
put some of those banana plug terminal things in I suppose.
Too much work for me.
On 1/2/2016 5:40 PM, Scott Vander Dussen wrote:
With a +48vdc power source would it make sense to power a
CCR1016-12S-1S+
<http://routerboard.com/CCR1016-12S-1Splus> by opening the
case, bypassing the AC power supplies, and connecting a
TRACO Power TCL 060-124
<http://www.mouser.com/ProductDetail/TRACO-Power/TCL-060-124/?qs=ckJk83FOD0WMJFH7E7aMOQ%3D%3D>
directly to the routerboard? Is there an easier more
efficient way? Trying to avoid using AC at all, thanks.
--