So you would want the mast holder to have U bolts? Then you supply your own
mast?
I looked at the wall brace, I don’t remember what the issue was, probably could
not build it for a competitive price. I know I played with the design a bit.
From: Jaime Solorza
Sent: Saturday, January 9, 2016 11:36 AM
To: Animal Farm
Subject: Re: [AFMUG] Non penetrating mounts
OK...here goes...make the mast holder brace like ones on J arms with degrees on
it. Make wide enough to hold different diameter pipe. The screw and bolt
serves two purposes... hinge and anti rotation. So now you can tilt mast as
needed. The yoke will be wide enough to accommodate different size pipe and
by using same tightening method but with longer screws you can adjust to
position. This will work whether support base is traditional or hinged. Easy
enough to make telescoping arms if you have a machine shop. I waive my
consulting fee for the good of the list. BTW..hey Chuck... you ever make that
wall brace idea I sent you?
On Jan 9, 2016 11:26 AM, "Joshaven Mailing Lists" <lis...@joshaven.com> wrote:
How about Lego® style where you can add/remove parts to make it work for
larger & smaller setups…
Sincerely,
Joshaven Potter
Google Hangouts: j...@g2wireless.co
Cell & SMS: 1-517-607-9370
supp...@joshaven.com
On Jan 9, 2016, at 1:05 PM, Chuck McCown <ch...@wbmfg.com> wrote:
I get constantly asked to do a non penetrating mount. I have always
resisted because there are a ton of them out there already. But I get almost
daily searches for this term on my website. It appears folks presume I have
one.
If I did one, I would like to have some feature or quality that
differentiates it from the rest. Perhaps a unit that can be locked or hinged
for flat or peak mounts.
Maybe one with hinged legs that give it a wider footprint using greater
leverage so you don’t need as many concrete blocks.
I dunno, any ideas?
