Ha.  Just add a O to ending...I promise not to laugh at your dancing if you
don't laugh at my English.
On Jan 9, 2016 12:06 PM, <ch...@wbmfg.com> wrote:

>
> http://www.nytimes.com/video/movies/100000003393598/the-mexican-scene-i-need-a-lift-in-your-el-trucko.html
>
> *From:* Jaime Solorza <losguyswirel...@gmail.com>
> *Sent:* Saturday, January 9, 2016 11:57 AM
> *To:* Animal Farm <af@afmug.com>
> *Subject:* Re: [AFMUG] Non penetrating mounts
>
>
> No U bolts.. let me sketch it out...my English is not good.  Ha
> On Jan 9, 2016 11:45 AM, <ch...@wbmfg.com> wrote:
>
>> So you would want the mast holder to have U bolts?  Then you supply your
>> own mast?
>>
>> I looked at the wall brace, I don’t remember what the issue was, probably
>> could not build it for a competitive price.  I know I played with the
>> design a bit.
>>
>>
>>
>> *From:* Jaime Solorza <losguyswirel...@gmail.com>
>> *Sent:* Saturday, January 9, 2016 11:36 AM
>> *To:* Animal Farm <af@afmug.com>
>> *Subject:* Re: [AFMUG] Non penetrating mounts
>>
>>
>> OK...here goes...make the mast holder brace like ones on J arms with
>> degrees on it.  Make wide enough to hold different diameter pipe. The screw
>> and bolt serves two purposes... hinge and anti rotation.  So now you can
>> tilt mast as needed.   The yoke will be wide enough to accommodate
>> different size pipe and by using same tightening method but with longer
>> screws you can adjust to position. This will work whether support base is
>> traditional or hinged.  Easy enough to make telescoping arms if you have a
>> machine shop.  I waive my consulting fee for the good of the list. BTW..hey
>> Chuck... you ever make that wall brace idea I sent you?
>> On Jan 9, 2016 11:26 AM, "Joshaven Mailing Lists" <lis...@joshaven.com>
>> wrote:
>>
>>> How about Lego® style where you can add/remove parts to make it work for
>>> larger & smaller setups…
>>>
>>>
>>> Sincerely,
>>> Joshaven Potter
>>> Google Hangouts: j...@g2wireless.co
>>> Cell & SMS: 1-517-607-9370
>>> supp...@joshaven.com
>>>
>>>
>>>
>>>
>>> On Jan 9, 2016, at 1:05 PM, Chuck McCown <ch...@wbmfg.com> wrote:
>>>
>>> I get constantly asked to do a non penetrating mount.  I have always
>>> resisted because there are a ton of them out there already.  But I get
>>> almost daily searches for this term on my website.  It appears folks
>>> presume I have one.
>>>
>>> If I did one, I would like to have some feature or quality that
>>> differentiates it from the rest.  Perhaps a unit that can be locked or
>>> hinged for flat or peak mounts.
>>>
>>> Maybe one with hinged legs that give it a wider footprint using greater
>>> leverage so you don’t need as many concrete blocks.
>>>
>>> I dunno, any ideas?
>>>
>>>
>>>
>>

Reply via email to