Will the EPMP actually output 36db EIRP in 5150mhz-5250mhz? If so thats
news to me.

On Tue, Feb 23, 2016 at 11:39 AM, Josh Luthman <j...@imaginenetworksllc.com>
wrote:

> epmp?
>
> 5.1 is 18dbm tx max power, 36 eirp
> 5.7 is 23dbm tx max power, 36 eirp
>
> I believe...
>
>
> Josh Luthman
> Office: 937-552-2340
> Direct: 937-552-2343
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> On Tue, Feb 23, 2016 at 11:27 AM, Kurt Fankhauser <
> lists.wavel...@gmail.com> wrote:
>
>> Josh,
>>
>> If I remember correctly doesnt the EPMP have some really low legal TX
>> power on 5150-5250 though? Even though the rules allow for higher EIRP in
>> that band? I think that was done to make the EPMP pass the strict OOBE
>> requirements for 5150-5250. I wonder if the 450i is able to run higher
>> power in that band because of better components? If so that would be worth
>> the price difference to some...
>>
>> On Tue, Feb 23, 2016 at 11:18 AM, Josh Luthman <
>> j...@imaginenetworksllc.com> wrote:
>>
>>> I would expect a purpose built product didn't have a whole lot of OOBE
>>> problems.  Same company also does Atheros radios and they're $100 a piece.
>>>
>>> I'd guess the problem is that the hardware they built depends on
>>> components that don't extend that wide range of frequencies.  It's like if
>>> you made one product versus a million, cost per unit goes way down.
>>>
>>>
>>> Josh Luthman
>>> Office: 937-552-2340
>>> Direct: 937-552-2343
>>> 1100 Wayne St
>>> Suite 1337
>>> Troy, OH 45373
>>>
>>> On Tue, Feb 23, 2016 at 11:15 AM, Kurt Fankhauser <
>>> lists.wavel...@gmail.com> wrote:
>>>
>>>> Is that why the 450i SM is so expensive because of the strict OOBE
>>>> requirements in 5150-5250mhz?
>>>>
>>>> On Tue, Feb 23, 2016 at 9:54 AM, Josh Luthman <
>>>> j...@imaginenetworksllc.com> wrote:
>>>>
>>>>> That band is NOT DFS.  It is a bit less power than 5.7.  The pmp450 SM
>>>>> is super super super expensive to do 5.1 (today; Matt recently said 
>>>>> they're
>>>>> looking at a solution to this).  Epmp does it at the same price as 5.4 or
>>>>> 5.7.
>>>>>
>>>>>
>>>>> Josh Luthman
>>>>> Office: 937-552-2340
>>>>> Direct: 937-552-2343
>>>>> 1100 Wayne St
>>>>> Suite 1337
>>>>> Troy, OH 45373
>>>>>
>>>>> On Tue, Feb 23, 2016 at 9:47 AM, Craig Schmaderer <
>>>>> cr...@skywaveconnect.com> wrote:
>>>>>
>>>>>> I know its been talked about a bit, but is this band have no dfs on
>>>>>> the 450i?  I have been told it has similar power ratings as the 5.8ghz
>>>>>> band?  Can anyone give me the right info.  I need a new PTP link and need
>>>>>> to avoid dfs.  Also, the PMP 450i running in this band only sm that has
>>>>>> 5.1ghz is the 450i sm right?  Thanks, Craig.
>>>>>>
>>>>>>
>>>>>>
>>>>>> *Craig R. Schmaderer*
>>>>>>
>>>>>> *CEO | Skywave Wireless, Inc.*
>>>>>>
>>>>>> *Ph: 402-372-1975 <402-372-1975> | Fax: 402-372-1058 <402-372-1058>*
>>>>>>
>>>>>> *Direct: 402-372-1052 <402-372-1052>*
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>
>>
>

Reply via email to