Correct. You simply do TDD PTP or ePTP mode (since they're specifically PTP rules).
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Feb 23, 2016 at 11:43 AM, Mathew Howard <mhoward...@gmail.com> wrote: > Yes, it will (depending on the antenna). They can actually do quite a bit > more than that in PTP mode - I believe a Force200 or 110 will do 43dbm EIRP > in PTP. > > On Tue, Feb 23, 2016 at 10:41 AM, Kurt Fankhauser < > lists.wavel...@gmail.com> wrote: > >> Will the EPMP actually output 36db EIRP in 5150mhz-5250mhz? If so thats >> news to me. >> >> On Tue, Feb 23, 2016 at 11:39 AM, Josh Luthman < >> j...@imaginenetworksllc.com> wrote: >> >>> epmp? >>> >>> 5.1 is 18dbm tx max power, 36 eirp >>> 5.7 is 23dbm tx max power, 36 eirp >>> >>> I believe... >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Tue, Feb 23, 2016 at 11:27 AM, Kurt Fankhauser < >>> lists.wavel...@gmail.com> wrote: >>> >>>> Josh, >>>> >>>> If I remember correctly doesnt the EPMP have some really low legal TX >>>> power on 5150-5250 though? Even though the rules allow for higher EIRP in >>>> that band? I think that was done to make the EPMP pass the strict OOBE >>>> requirements for 5150-5250. I wonder if the 450i is able to run higher >>>> power in that band because of better components? If so that would be worth >>>> the price difference to some... >>>> >>>> On Tue, Feb 23, 2016 at 11:18 AM, Josh Luthman < >>>> j...@imaginenetworksllc.com> wrote: >>>> >>>>> I would expect a purpose built product didn't have a whole lot of OOBE >>>>> problems. Same company also does Atheros radios and they're $100 a piece. >>>>> >>>>> I'd guess the problem is that the hardware they built depends on >>>>> components that don't extend that wide range of frequencies. It's like if >>>>> you made one product versus a million, cost per unit goes way down. >>>>> >>>>> >>>>> Josh Luthman >>>>> Office: 937-552-2340 >>>>> Direct: 937-552-2343 >>>>> 1100 Wayne St >>>>> Suite 1337 >>>>> Troy, OH 45373 >>>>> >>>>> On Tue, Feb 23, 2016 at 11:15 AM, Kurt Fankhauser < >>>>> lists.wavel...@gmail.com> wrote: >>>>> >>>>>> Is that why the 450i SM is so expensive because of the strict OOBE >>>>>> requirements in 5150-5250mhz? >>>>>> >>>>>> On Tue, Feb 23, 2016 at 9:54 AM, Josh Luthman < >>>>>> j...@imaginenetworksllc.com> wrote: >>>>>> >>>>>>> That band is NOT DFS. It is a bit less power than 5.7. The pmp450 >>>>>>> SM is super super super expensive to do 5.1 (today; Matt recently said >>>>>>> they're looking at a solution to this). Epmp does it at the same price >>>>>>> as >>>>>>> 5.4 or 5.7. >>>>>>> >>>>>>> >>>>>>> Josh Luthman >>>>>>> Office: 937-552-2340 >>>>>>> Direct: 937-552-2343 >>>>>>> 1100 Wayne St >>>>>>> Suite 1337 >>>>>>> Troy, OH 45373 >>>>>>> >>>>>>> On Tue, Feb 23, 2016 at 9:47 AM, Craig Schmaderer < >>>>>>> cr...@skywaveconnect.com> wrote: >>>>>>> >>>>>>>> I know its been talked about a bit, but is this band have no dfs on >>>>>>>> the 450i? I have been told it has similar power ratings as the 5.8ghz >>>>>>>> band? Can anyone give me the right info. I need a new PTP link and >>>>>>>> need >>>>>>>> to avoid dfs. Also, the PMP 450i running in this band only sm that has >>>>>>>> 5.1ghz is the 450i sm right? Thanks, Craig. >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> *Craig R. Schmaderer* >>>>>>>> >>>>>>>> *CEO | Skywave Wireless, Inc.* >>>>>>>> >>>>>>>> *Ph: 402-372-1975 <402-372-1975> | Fax: 402-372-1058 <402-372-1058>* >>>>>>>> >>>>>>>> *Direct: 402-372-1052 <402-372-1052>* >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> >
