Yes, it will (depending on the antenna). They can actually do quite a bit more than that in PTP mode - I believe a Force200 or 110 will do 43dbm EIRP in PTP.
On Tue, Feb 23, 2016 at 10:41 AM, Kurt Fankhauser <lists.wavel...@gmail.com> wrote: > Will the EPMP actually output 36db EIRP in 5150mhz-5250mhz? If so thats > news to me. > > On Tue, Feb 23, 2016 at 11:39 AM, Josh Luthman < > j...@imaginenetworksllc.com> wrote: > >> epmp? >> >> 5.1 is 18dbm tx max power, 36 eirp >> 5.7 is 23dbm tx max power, 36 eirp >> >> I believe... >> >> >> Josh Luthman >> Office: 937-552-2340 >> Direct: 937-552-2343 >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Tue, Feb 23, 2016 at 11:27 AM, Kurt Fankhauser < >> lists.wavel...@gmail.com> wrote: >> >>> Josh, >>> >>> If I remember correctly doesnt the EPMP have some really low legal TX >>> power on 5150-5250 though? Even though the rules allow for higher EIRP in >>> that band? I think that was done to make the EPMP pass the strict OOBE >>> requirements for 5150-5250. I wonder if the 450i is able to run higher >>> power in that band because of better components? If so that would be worth >>> the price difference to some... >>> >>> On Tue, Feb 23, 2016 at 11:18 AM, Josh Luthman < >>> j...@imaginenetworksllc.com> wrote: >>> >>>> I would expect a purpose built product didn't have a whole lot of OOBE >>>> problems. Same company also does Atheros radios and they're $100 a piece. >>>> >>>> I'd guess the problem is that the hardware they built depends on >>>> components that don't extend that wide range of frequencies. It's like if >>>> you made one product versus a million, cost per unit goes way down. >>>> >>>> >>>> Josh Luthman >>>> Office: 937-552-2340 >>>> Direct: 937-552-2343 >>>> 1100 Wayne St >>>> Suite 1337 >>>> Troy, OH 45373 >>>> >>>> On Tue, Feb 23, 2016 at 11:15 AM, Kurt Fankhauser < >>>> lists.wavel...@gmail.com> wrote: >>>> >>>>> Is that why the 450i SM is so expensive because of the strict OOBE >>>>> requirements in 5150-5250mhz? >>>>> >>>>> On Tue, Feb 23, 2016 at 9:54 AM, Josh Luthman < >>>>> j...@imaginenetworksllc.com> wrote: >>>>> >>>>>> That band is NOT DFS. It is a bit less power than 5.7. The pmp450 >>>>>> SM is super super super expensive to do 5.1 (today; Matt recently said >>>>>> they're looking at a solution to this). Epmp does it at the same price >>>>>> as >>>>>> 5.4 or 5.7. >>>>>> >>>>>> >>>>>> Josh Luthman >>>>>> Office: 937-552-2340 >>>>>> Direct: 937-552-2343 >>>>>> 1100 Wayne St >>>>>> Suite 1337 >>>>>> Troy, OH 45373 >>>>>> >>>>>> On Tue, Feb 23, 2016 at 9:47 AM, Craig Schmaderer < >>>>>> cr...@skywaveconnect.com> wrote: >>>>>> >>>>>>> I know its been talked about a bit, but is this band have no dfs on >>>>>>> the 450i? I have been told it has similar power ratings as the 5.8ghz >>>>>>> band? Can anyone give me the right info. I need a new PTP link and >>>>>>> need >>>>>>> to avoid dfs. Also, the PMP 450i running in this band only sm that has >>>>>>> 5.1ghz is the 450i sm right? Thanks, Craig. >>>>>>> >>>>>>> >>>>>>> >>>>>>> *Craig R. Schmaderer* >>>>>>> >>>>>>> *CEO | Skywave Wireless, Inc.* >>>>>>> >>>>>>> *Ph: 402-372-1975 <402-372-1975> | Fax: 402-372-1058 <402-372-1058>* >>>>>>> >>>>>>> *Direct: 402-372-1052 <402-372-1052>* >>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> >>>>> >>>> >>> >> >
