I'm working on the bench with a UBNT Edgepoint (R6 model) The newest
firmware allows you to set per port untagged Vlans in switch mode. I'm
thinking of using this to power a cluster of AP's, but I'd like to keep
the ability to view per port traffic in the mikrotik via Torch for
monitoring/troubleshooting purposes. My Plan was to put each port on
the R6 on a different Vlan, Have a Trunk port to the mikrotik, then just
bridge the Vlans together in the Mikrotik. This mostly works, as the
Mikrotik can talk to each AP, but the AP's cannot ping each other, and
it seems that I have random packet loss from the Mikrotik to the AP's.
Is there a setting I'm missing that's blocking the traffic between
Vlans, or is this a Edgepoint problem? Or does it not like that I'm
bridging all these Vlans that are on the same Mikrotik interface.
- [AFMUG] Mikrotik Bridging VLans Nate Burke
- Re: [AFMUG] Mikrotik Bridging VLans Josh Reynolds
- Re: [AFMUG] Mikrotik Bridging VLans Mike Hammett
- Re: [AFMUG] Mikrotik Bridging VLans Nate Burke
- Re: [AFMUG] Mikrotik Bridging VLans Josh Reynolds
- Re: [AFMUG] Mikrotik Bridging VLans Nate Burke
- Re: [AFMUG] Mikrotik Bridging VLans Erich Kaiser
- Re: [AFMUG] Mikrotik Bridging VLans Josh Reynolds
- Re: [AFMUG] Mikrotik Bridging VLans Chuck McCown
- Re: [AFMUG] Mikrotik Bridging VLans Mike Hammett
- Re: [AFMUG] Mikrotik Bridging VLans Mike Hammett