It doesn't like that you're bridging all these vlans. From experience, it's nothing but broken-ness.
You can still torch each vlan interface you know. On Jun 28, 2016 10:42 AM, "Nate Burke" <n...@blastcomm.com> wrote: > I'm working on the bench with a UBNT Edgepoint (R6 model) The newest > firmware allows you to set per port untagged Vlans in switch mode. I'm > thinking of using this to power a cluster of AP's, but I'd like to keep the > ability to view per port traffic in the mikrotik via Torch for > monitoring/troubleshooting purposes. My Plan was to put each port on the > R6 on a different Vlan, Have a Trunk port to the mikrotik, then just bridge > the Vlans together in the Mikrotik. This mostly works, as the Mikrotik can > talk to each AP, but the AP's cannot ping each other, and it seems that I > have random packet loss from the Mikrotik to the AP's. Is there a setting > I'm missing that's blocking the traffic between Vlans, or is this a > Edgepoint problem? Or does it not like that I'm bridging all these Vlans > that are on the same Mikrotik interface. >
