I think you have a fundamental misunderstanding of the purpose of vlans... On Jun 28, 2016 10:48 AM, "Nate Burke" <n...@blastcomm.com> wrote:
> Then how do I get all the Ports on the Edgepoint to share the same IP > Space? > > On 6/28/2016 10:45 AM, Mike Hammett wrote: > > *nods* just leave the VLANs as native interfaces on the Mikrotik. No need > to bridge them. > > > > ----- > Mike Hammett > Intelligent Computing Solutions <http://www.ics-il.com/> > <https://www.facebook.com/ICSIL> > <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> > <https://www.linkedin.com/company/intelligent-computing-solutions> > <https://twitter.com/ICSIL> > Midwest Internet Exchange <http://www.midwest-ix.com/> > <https://www.facebook.com/mdwestix> > <https://www.linkedin.com/company/midwest-internet-exchange> > <https://twitter.com/mdwestix> > The Brothers WISP <http://www.thebrotherswisp.com/> > <https://www.facebook.com/thebrotherswisp> > > > <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> > ------------------------------ > *From: *"Josh Reynolds" <j...@kyneticwifi.com> <j...@kyneticwifi.com> > *To: *af@afmug.com > *Sent: *Tuesday, June 28, 2016 10:44:28 AM > *Subject: *Re: [AFMUG] Mikrotik Bridging VLans > > It doesn't like that you're bridging all these vlans. From experience, > it's nothing but broken-ness. > > You can still torch each vlan interface you know. > On Jun 28, 2016 10:42 AM, "Nate Burke" <n...@blastcomm.com> wrote: > >> I'm working on the bench with a UBNT Edgepoint (R6 model) The newest >> firmware allows you to set per port untagged Vlans in switch mode. I'm >> thinking of using this to power a cluster of AP's, but I'd like to keep the >> ability to view per port traffic in the mikrotik via Torch for >> monitoring/troubleshooting purposes. My Plan was to put each port on the >> R6 on a different Vlan, Have a Trunk port to the mikrotik, then just bridge >> the Vlans together in the Mikrotik. This mostly works, as the Mikrotik can >> talk to each AP, but the AP's cannot ping each other, and it seems that I >> have random packet loss from the Mikrotik to the AP's. Is there a setting >> I'm missing that's blocking the traffic between Vlans, or is this a >> Edgepoint problem? Or does it not like that I'm bridging all these Vlans >> that are on the same Mikrotik interface. >> > > >