Yo be fair, you're pretty much wasting many of the capabilities of the edgepoint, but you can do it that way if you want, or use Mike's suggestion. On Jun 28, 2016 10:52 AM, "Nate Burke" <n...@blastcomm.com> wrote:
> Ok, so I'm hearing "the way you're doing it is wrong" Is there a better > way? Or just let the R6 act as a dumb switch, and then log into that to > try to troubleshoot any per port issues. > > On 6/28/2016 10:49 AM, Josh Reynolds wrote: > > I think you have a fundamental misunderstanding of the purpose of vlans... > On Jun 28, 2016 10:48 AM, "Nate Burke" <n...@blastcomm.com> wrote: > >> Then how do I get all the Ports on the Edgepoint to share the same IP >> Space? >> >> On 6/28/2016 10:45 AM, Mike Hammett wrote: >> >> *nods* just leave the VLANs as native interfaces on the Mikrotik. No need >> to bridge them. >> >> >> >> ----- >> Mike Hammett >> Intelligent Computing Solutions <http://www.ics-il.com/> >> <https://www.facebook.com/ICSIL> >> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb> >> <https://www.linkedin.com/company/intelligent-computing-solutions> >> <https://twitter.com/ICSIL> >> Midwest Internet Exchange <http://www.midwest-ix.com/> >> <https://www.facebook.com/mdwestix> >> <https://www.linkedin.com/company/midwest-internet-exchange> >> <https://twitter.com/mdwestix> >> The Brothers WISP <http://www.thebrotherswisp.com/> >> <https://www.facebook.com/thebrotherswisp> >> >> >> <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg> >> ------------------------------ >> *From: *"Josh Reynolds" <j...@kyneticwifi.com> <j...@kyneticwifi.com> >> *To: *af@afmug.com >> *Sent: *Tuesday, June 28, 2016 10:44:28 AM >> *Subject: *Re: [AFMUG] Mikrotik Bridging VLans >> >> It doesn't like that you're bridging all these vlans. From experience, >> it's nothing but broken-ness. >> >> You can still torch each vlan interface you know. >> On Jun 28, 2016 10:42 AM, "Nate Burke" <n...@blastcomm.com> wrote: >> >>> I'm working on the bench with a UBNT Edgepoint (R6 model) The newest >>> firmware allows you to set per port untagged Vlans in switch mode. I'm >>> thinking of using this to power a cluster of AP's, but I'd like to keep the >>> ability to view per port traffic in the mikrotik via Torch for >>> monitoring/troubleshooting purposes. My Plan was to put each port on the >>> R6 on a different Vlan, Have a Trunk port to the mikrotik, then just bridge >>> the Vlans together in the Mikrotik. This mostly works, as the Mikrotik can >>> talk to each AP, but the AP's cannot ping each other, and it seems that I >>> have random packet loss from the Mikrotik to the AP's. Is there a setting >>> I'm missing that's blocking the traffic between Vlans, or is this a >>> Edgepoint problem? Or does it not like that I'm bridging all these Vlans >>> that are on the same Mikrotik interface. >>> >> >> >> >