Hi Guys.
You may remember within his H6 Review, Neal stated "I would not know just
how to measure the Floor noise , because there doesent seem to be one!
Andy.
know ----- Original Message -----
From: "Hamit Campos" <hamitcam...@gmail.com>
To: <all-audio@groups.io>
Sent: Wednesday, May 13, 2020 7:34 PM
Subject: Re: [all-audio] Recording from recorders like Zoom - How would you
do it?
Ah yeah than 35 must be the 1 Neal sent. He sent it to the Reaper list.
I've yet to finish that 1.
On 5/13/2020 12:17 PM, Georgina Joyce wrote:
Hello Hamit,
No 36 is out.
On 13 May 2020, at 17:04, Hamit Campos <hamitcam...@gmail.com> wrote:
Is 35 the newest 1? IF so no I've meant to just haven't gotten to it.
Will do soon though. Thanks for the reminder.
On 5/13/2020 11:13 AM, Georgina Joyce wrote:
Hello Hamit,
Out of interest do you listen to Mosen at large (specifically 35)? He
is singing from the roof about the F6 as it has an iPhone app which is
not perfect but gives access to functions we have never had access to
before.
Regards,
On 13 May 2020, at 16:07, Hamit Campos <hamitcam...@gmail.com> wrote:
Actually Gena there's 1 place where I'll give it to ya. Dynamic mics.
This is also true for the H5 but much much less oddly enough. Same for
the H4N Pro. The H6 in this respect is again as noisy as the Olympus
LS-100. Now can't say on the F6 as no one's demoed dynamics on that
yet and Neal hasn't demoed dynamics on his 744-T so can't say nothing
on that either.
On 5/13/2020 11:02 AM, Georgina Joyce wrote:
Hello Aidan,
Well I am picky, there is nothing wrong in getting the best out of
the equipment. The Zoom 6 pre-amps are renowned for their hiss. It
would be useful to share your tips to get the most from the recorder.
Regards,
On 13 May 2020, at 13:52, Aidan <aidan.smartt...@gmail.com> wrote:
If using something like h6 I cannot really imagine that you would
need
to apply noise filters. Unless you very picky.
On 5/13/20, Georgina Joyce <g...@gena-j.me.uk> wrote:
Hello Tim,
Interesting, if using a non destructive DAW like reaper, if it is
incorrectly applied simply undo it. I am not familiar with using
expanders.
But the noise comes from whatever equipment. Very few mics have a
undetectable noise floor and even the best pre-amps have some
noise. So a
light touch of post processing is likely to be required. But as you
rightly
point out it is down to the environment and what purpose the
recording is to
serve.
Thanks,
On 13 May 2020, at 12:23, tim cumings <thcumi...@comcast.net>
wrote:
I agree about most of theadvice here. However i would be careful
about
using a noise gate. If set incorrectly, a noise gate can make
things sound
worse than better. A downward expander would be better, but if you
are
using a quality mic and have recording levels set properly, even a
downward expander probably isn't necessary, depending on what you
are
recording.
On 5/12/2020 5:30 PM, Georgina Joyce wrote:
Hello All,
Rather than making the current discussion on Zoom Microphones.
very long
I thought I would ask the community of their experiences and how
they
undertake a recording? As I was not sure if Andy wanted tips on
recording
techniques I thought such a thread would help him and those of us
who
have a Zoom.
Firstly, I would record in wav. Then use reaper to apply a noise
gate.
This removes hiss and other quiet unwanted noises.
I would not use a capsule on the recorder unless it was the only
mic
available for that application. Using such a mic I would secure
the
recorder and start the recording early so that I could discard
the first
second as it will contain handling noise.
I would not wear noisy clothing or jewellery and try to get away
from the
active recording space. It is surprising how clothing, shoes and
bangles
rustle and jangle when you are trying to be quiet.
Then it is about choosing the mic for the sound stage I am trying
to
capture. Remembering that the wider stage means that I have to be
that
much quieter. It could pick me up breathing and moving my feet.
Then there are practical considerations such as power for the
Zoom and
protection from wind and rain.
Of the top of my head these are the considerations I would employ
before
a recording. So what about your experiences and approach?
Regards,
Gena
Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73
Gena
Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73
Gena
Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73
Gena
Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73
--
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
Gena
Call: M0EBP
DMR ID: 2346259
Loc: IO83PS
73
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#3193): https://groups.io/g/all-audio/message/3193
Mute This Topic: https://groups.io/mt/74168935/21656
Group Owner: all-audio+ow...@groups.io
Unsubscribe: https://groups.io/g/all-audio/leave/1074140/405281159/xyzzy
[arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
