On Wed, 13 Nov 2002, Jesse Marlin wrote: > > using master volume? very strange. can you send me your config > > files,? not sure which ones are important, I guess asound.state, > > relevant parts /etc/modules.conf, maybe some toher ones? > > > > btw I also upgraded from rc3 to rc5, it changed the controls > > in mixer a bit but still no change in function (as far as I can > > tell). > > > > I don't know what those Send Routing controls are for, but they do > seem to affect certain things. I noticed that one of them increased/ > decreased the volume on my left front speaker. Weird. It would > be nice to know what this stuff means in laymen's terms. > > > There is some useful info here too. Though I don't see any mention > of master volumes. > > cat /proc/asound/card0/emu10k1 > > Here they are. My emails seem to keep getting rejected on the list > for some reason. So don't look for it there. > > /etc/modules.conf ... > /etc/asound.state ...
I checked the modules.copnf, I have basically same setup, I also used your asound.state but there's no difference... what speaker configuration do you use? in addition to that my fornt speakers do not play anymore, it's really weird - they do not play with my original asound.state and they do not play when I use your asound.state (I noticed that they do not play before I tried your asound.state). it might be result of my tinkering but how come it still doesn't work when I load you asound.conf? right now (I use lables that alsamixer uses, same order but I don't list all of them): listening to xmms with alsa output plaugin (same appliesto OSS plugin even though I didn't tested it so thoroughly) as stated above, sound comes out of rear speakers and subwoofer only. Master nothing 3D Control* nothing Surround only subwoofer? Surround Digital nothing Center nothing LFE nothing Wave nothing Wave Center nothing Wave LFE only subwoofer Wave Surround works Aux nothing (OK? don't know what it is) AC97 nothing all of the EMU10K1 seem to do something, not sure what, oftedn I can't even tell what changed. They are reset to values listed below everytime xmms start to play (or goes to next song) EMU10K1 PCM 100<>100 controls left side? EMU10K1 PCM 100<>100 controls right side? EMU10K1 PCM Send 100<>100 nothing? EMU10K1 PCM Send 0<>100 EMU10K1 PCM Send 0<>0 EMU10K1 PCM Send 0<>0 EMU10K1 PCM Send Routing 0<>7 EMU10K1 PCM Send Routing 20<>0 EMU10K1 PCM Send Routing 13<>13 EMU10K1 PCM Send Routing 7<>7 SB Live Analog/Digital Output Jack unmuted: no sound at all muted: sound as described above anybody has any advices on how to make it work? (front speakers and master volume). erik ------------------------------------------------------- This sf.net email is sponsored by: To learn the basics of securing your web site with SSL, click here to get a FREE TRIAL of a Thawte Server Certificate: http://www.gothawte.com/rd524.html _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user