'Equipment Category' = $536870913$ is qualification for search menu.  I
believe this would be called a cascading menu, where I have 3 menus
where the available options depend on the value selected in the previous
menu.

'Equipment Category' references a field on another form and the
$536870913$ references the selection made in the previous menu.

The menu populates with the correct set of options, but I get the errors
when I try to save it? 

Andy L. Mayfield 
Sr. System Operation Specialist 
Alabama Power Company 
Office: 205-226-1805 
Cell: 205-288-9140 
SoLinc: 10*19140 

________________________________

From: Action Request System discussion list(ARSList)
[mailto:[EMAIL PROTECTED] On Behalf Of Thomas Bean
Sent: Thursday, March 06, 2008 2:07 PM
To: arslist@ARSLIST.ORG
Subject: Re: Pattern of $MENU$

 

Andy,

What search qualification do you have defined in the menu attached to
the character field?

 

--Thomas

 

        ----- Original Message ----- 

        From: Mayfield, Andy L. <mailto:[EMAIL PROTECTED]>  

        Newsgroups: gmane.comp.crm.arsystem.general

        To: arslist@ARSLIST.ORG 

        Sent: Thursday, March 06, 2008 1:58 PM

        Subject: Re: Pattern of $MENU$

         

        ** 

        I am confused now. I am using the same setup on other fields
with no problem, but for some reason on this form it doesn't want to
work.

         

        Andy L. Mayfield 
        Sr. System Operation Specialist 
        Alabama Power Company 
        Office: 205-226-1805 
        Cell: 205-288-9140 
        SoLinc: 10*19140 

        
________________________________


        From: Action Request System discussion list(ARSList)
[mailto:[EMAIL PROTECTED] On Behalf Of Thomas Bean
        Sent: Thursday, March 06, 2008 1:15 PM
        To: arslist@ARSLIST.ORG
        Subject: Re: Pattern of $MENU$

         

        $MENU$ patterns below version will work in earlier versions of
ARS, but not if the search qualification defined in the search menu
contains a dynamic field reference.

         

        e.g.:

        'Equipment Category' = $536870913$

         

        There was a workaround for this, however (see attached).

         

        This workaround should still be valid on later versions of ARS.
However, it would be MUCH simpler to follow Joe's suggestion, and change
the display type to 'Drop-Down List' in the display properties of the
character field to which the search menu is attached (unless for some
reason you don't want the character field to look like a selection
field).

         

        HTH,

         

        --Thomas

         

         

__Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are"
html___

_______________________________________________________________________________
UNSUBSCRIBE or access ARSlist Archives at www.arslist.org
Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are"

Reply via email to