That's an interesting addition.. I knew that they had added a few more
options but hadn't got anal into that list. In the past -g did groups too
but I got this tip from none other than our God Doug Mueller once that that
switch reads changes in definitions too. Looks like they might have
separated the two functions now.. Probably it is still backward compatible
to be consistent with old workflow that might be using it?

Cheers

Joe
  -----Original Message-----
  From: Action Request System discussion list(ARSList)
[mailto:[email protected]]on Behalf Of Conny Martin
  Sent: Tuesday, December 23, 2008 9:15 AM
  To: [email protected]
  Subject: AW: AW: how to use Application-Format-Qual-ID


  **
  one remark on this.

  If you are on ARS 7.1 you must use arsignal -r instead of arsignal -g
(perhaps this changed in 7.0, don't know exactly)

  arad...@affhc151:/home/upiefke/bin/git> /apps/ars/ars710p4/bin/arsignal
  Usage: /apps/ars/ars710p4/bin/arsignal -c hostname[:port] [sigArgument] -
read configuration file
         /apps/ars/ars710p4/bin/arsignal -g hostname[:port] [sigArgument] -
read group information
         /apps/ars/ars710p4/bin/arsignal -m hostname[:port] [sigArgument] -
read computed group information
         /apps/ars/ars710p4/bin/arsignal -l hostname[:port] [sigArgument] -
read license information
         /apps/ars/ars710p4/bin/arsignal -a hostname[:port] [sigArgument] -
update alert user information
         /apps/ars/ars710p4/bin/arsignal -u hostname[:port] [sigArgument] -
read user information
         /apps/ars/ars710p4/bin/arsignal -d hostname[:port] [sigArgument] -
transfer signal to DSO process
         /apps/ars/ars710p4/bin/arsignal -p hostname[:port] [sigArgument] -
transfer signal to application process
         /apps/ars/ars710p4/bin/arsignal -r hostname[:port] [sigArgument] -
recache definitions from database
         /apps/ars/ars710p4/bin/arsignal -b hostname[:port] [sigArgument] -
recache and reload archive definitions
         /apps/ars/ars710p4/bin/arsignal -e hostname[:port] [sigArgument] -
recache and reload escalation definitions
         /apps/ars/ars710p4/bin/arsignal -version - prints the version
information



----------------------------------------------------------------------------
--
  Von: Action Request System discussion list(ARSList)
[mailto:[email protected]] Im Auftrag von Joe D'Souza
  Gesendet: Dienstag, 23. Dezember 2008 15:09
  An: [email protected]
  Betreff: Re: AW: how to use Application-Format-Qual-ID


  **
  Serouche,

  Use it in an Escalation in a Run Process if the change to the default
prefix is at a definite interval after changing the prefix using a Direct
SQL

  Syntax:
  /install/path/of/your/application/bin/arsignal -g <hostname>:<port number
if applicable>

  If the change in prefix happens on an event rather than a interval, try
creating a form and set an entry to it on that event that triggers the
above..

  Cheers

  Joe
    -----Original Message-----
    From: Action Request System discussion list(ARSList)
[mailto:[email protected]]on Behalf Of Remedy Maniac
    Sent: Tuesday, December 23, 2008 9:02 AM
    To: [email protected]
    Subject: Re: AW: how to use Application-Format-Qual-ID


    ** Thank you Joe,

    This seems to be fine. Tickets in that schema are not created that
often.
    But I don't really see how I could use the arsignal in my flow ...
    could you tell me more please?
    Thank you
    serouche


    Joe D'Souza wrote:
      **
      What exactly do you want your Request Id to be?

      The Run Process you thought might help as Martin pointed out is to
convert internal meta data that represents run if qualification into what
you see in the Admin too and vice versa.

      Dynamically changing prefixes of Request ID's can be done provided you
recache the definition immediately after triggering the change in the
default value of the prefix. You can do this using the arsignal command with
the -g switch.

      Having to recache the definitions obviously mean you cannot do it too
often (like every 5 minutes) because it would hammer your performance..

      Cheers

      Joe
        -----Original Message-----
        From: Action Request System discussion list(ARSList)
[mailto:[email protected]]on Behalf Of Remedy Maniac
        Sent: Tuesday, December 23, 2008 8:15 AM
        To: [email protected]
        Subject: Re: AW: how to use Application-Format-Qual-ID


        ** I just tried your idea. I get the following:
        Next available ID produces an Entry ID that overflows Entry ID
field --
        contact the Administrator (ARERR 305)
        This is probably because we already have 8000 rows in the form.
        The idea is to have every year <some string>YEAR0001, <some
string>YEAR0002,<some string>YEAR0003,<some string>YEAR0004, ...
        So right now what I do is every year after the first ticket is
created I export the row in a arx format. I manually make the change. Then
import with the import tool.
        And this way the next id gets the right format. And we are safe for
the rest of the year.
        But I'd like to have this self-service by Remedy itself.
        I am starting to doubt in the power of this tool. So it has at least
one limitation.



        Conny Martin wrote:
          **
          this special run process wouldn't help you.

          Documentation says: "Converts an internal representation of a
qualifier into a qualification string using ID format. "

          It deals with qualifiers not request_id formats.

          What about setting the Default-Value of the request_id field to
<some string>YEAR ? You have to adjust this every year, but it's simple.

          Kind Regards Conny



----------------------------------------------------------------------
          Von: Action Request System discussion list(ARSList)
[mailto:[email protected]] Im Auftrag von Remedy Maniac
          Gesendet: Dienstag, 23. Dezember 2008 14:00
          An: [email protected]
          Betreff: how to use Application-Format-Qual-ID


          ** Dear listers,

          some of my users would like to have a fancy Request_ID in the
following format:
          <some string>YEAR<Id number in 4 digits>
          After many unsuccesfull attempts, I believe the Process
Application-Format-Qual-ID could help
          The problem is I don't get it work.
          Could somebody give a hint on how to use this Process?
          Or simpler, if anybody has a better idea, please share.
          Thanks
          Serouche
No virus found in this outgoing message.
Checked by AVG.
Version: 7.5.552 / Virus Database: 270.10.0/1861 - Release Date: 12/22/2008
11:23 AM

_______________________________________________________________________________
UNSUBSCRIBE or access ARSlist Archives at www.arslist.org
Platinum Sponsor: www.rmsportal.com ARSlist: "Where the Answers Are"

Reply via email to