I think it's not so much overall machine requirements - as sizing the 
ASSP install for the machine. I have a V2 installation running on a 
production server WITH a mail server on the same machine - this 
machine is a five year old desktop, and has 1 gig of RAM - only 600MB 
of which is available to ASSP. I have V2 set up to run with two 
worker threads, and it runs perfectly, with 200MB left free. Granted, 
this is a very low volume server (<400 msgs/day) but the fact is, it 
is not so much V2 that has larger system requirements - it is V2, in 
combination with server load. My main server processes almost 100,000 
msgs/day, and it runs with 15 threads and has much higher memory and CPU load.

There is a fair amount of tuning to be done with V2. I think one of 
the most important things that could be done to guarantee the success 
of V2 would be to publish it with as many "sample" configurations as 
possible, so that people have something close to their requirements 
to start with, instead of trying to start to configure it from scratch.

At 02:45 PM 7/3/2009, Hill, Brett wrote:

>GrayHat wrote:
> >Thomas, as you know I've tried using v2 from time to time and
> >each time I had to rollback to 1.x since 2.x bombed on my test
> >system; the problem is probably due to memory constraint on
> >the test system, at any rate, I'll give v2 a spin next week to see
> >what comes out and will report about my findings
>
>I have not tried V2 yet.  But I have been watching most of the posts 
>regarding it.  Along that line, I think that when it is decided it 
>is safe to put on SF, a set of machine requirements (in bold) should 
>be defined for those who want to try it out (so as to not have 
>people trying it out and then coming back crying because it doesn't 
>work for them).  It will only make things that much better 
>(survivability wise) for ASSPS v2.  Good words spread around fast, 
>but bad ones spread faster (or something like that)!
>
>::steps down from soapbox
>
>Kind Regards,
>
>Brett
>
>
>
>------------------------------------------------------------------------------
>_______________________________________________
>Assp-test mailing list
>Assp-test@lists.sourceforge.net
>https://lists.sourceforge.net/lists/listinfo/assp-test
------------------------------------------------------------------------------
_______________________________________________
Assp-test mailing list
Assp-test@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/assp-test

Reply via email to