On Sat, Apr 10, 2010 at 1:43 PM, Lonnie Abelbeck <li...@lonnie.abelbeck.com> wrote: > > On Apr 10, 2010, at 2:20 PM, John Reynolds wrote: > >> I did a clean install of 0.7.1 on a net4801 (1G CF card). All seems fine. >> >> I have an Atheros CM9 miniPCI card installed in the soekris, and am >> tring to configure it to work. In the rc.conf I removed the '#' signs >> from: >> WIFI_ENABLE="yes" >> WIFIMODS="ath5k" >> >> also, >> BRIDGE0="eth1 ap0" >> >> and >> AP0="[as is in the rc.conf, with change from br1 to br0]" >> >> saved and rebooted, on the console as astlinux is rebooting I get the >> message "WiFi not enabled"... this is confirmed with "lsmod". I can >> modprobe ath5k and the CM9 is detected. What am I doing wrong? Thanks >> in advance for any guidance. >> >> John R. > > Did you edit /mnt/kd/rc.conf and the directory /mnt/kd/rc.conf.d/ does not > exist ? > > Or, are you using the web interface? > > Lonnie
I did edit rc.conf... and I am using the web interface for most other items. I didn't see where to do edits for WiFi in the web interface. (the rc.conf edit was done via the "edit" tab of the web interface, and not via nano directly... I doubt that matters). John R. ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
