Hi It is a good and nearest solution, I appreciate the thought process.
--- In Axapta-Knowledge-Village@yahoogroups.com, Anton Ivanov <anton_ivanov...@...> wrote: > > Hi, > One possible solution could be to use field âEfficiency percentageâ in > work center card. > This is the short description about the field in AX help file: âYou can > reduce or increase the processing time of individual jobs per day by using > the efficiency percentage. Example If a job requires six hours according to > the setup for the operation, and the efficiency percentage for the work > center is 50 percent, the job will then reserve capacity for three hours on > the first day and three hours on the second day.â >  Best regards, > AI > P.S. Such parameter is available also in Calendars > > --- On Wed, 6/3/09, cüneyt köker <c_ko...@...> wrote: > > > From: cüneyt köker <c_ko...@...> > Subject: [Axapta-Knowledge-Village] Alternative workcenter with different > process time > To: Axapta-Knowledge-Village@yahoogroups.com > Date: Wednesday, June 3, 2009, 5:33 AM > > > > > > > > > > > > > > > > Hi All, >  > Is there any way to set up the following case in AX? >  > A specific product can be produced on Machine1 (10 min/pcs), Machine2 (15 > min/pcs) and Machine3 (8 min/pcs) with different process times. Machine1 is > selected as work center on the route operation. I want to make AX consider > other two machines too if they are available when scheduling. And when doing > this, it must consider their different process times and schedule them that > way. >  > I know that task groups are used for similar purpose but it is not possible > to define different times by machine there. >  >  > Thank you in advance, >  > Cuneyt >