Mark Co-Dyre wrote:
> I've built the serial cable that fisher had so kindly documented. > Although in the documentation, I do suspect that the pin outs for Dell > pin number 10-Rx(dell in) and 11-TX(dell out) are reversed on the > practical serial cable making method; I think it should be 11-Rx, > 10-TX. if someone has a cable handy could they double check this for > me? Fisherss am I correct? For now I just hook a scope probe up to > both the pins (10 and 11) and try to make data come out of either or. > 11-TX , 10-RX is right, you can see it in the pin-out image, the image is exactly correct. and I have checked my cable, it connected as 11-TX , 10-RX . > Did you have to modify the haret program to get the serial port of the > dell up and running? Or will just modifying General Purpose I/O > Alternate Function Select Registers by adding the appropriate info the > default.txt file work just fine (set GAFR(34) 1 and so on) > I have fixed the serial output part of haret, its name is haret_uart.exe .and in your default.txt file, you should have this: ----------------------------- set GAFR(34) 1 set GAFR(35) 1 set GAFR(37) 1 set GAFR(39) 2 set GAFR(40) 2 set GAFR(41) 2 set GPDR(34) 0 set GPDR(35) 0 set GPDR(37) 0 set GPLR(34) 1 set GPLR(35) 1 set GPLR(37) 1 set GPLR(39) 1 --------------------------------- any other problem ? -- _______________________________________________ Aximx50-port mailing list [email protected] https://www.handhelds.org/mailman/listinfo/aximx50-port
