At some point a couple of years ago I turned my compressor over and shot a bunch of oil into the bottom of the tank and rolled it about because I am not so fastidious about draining the water out. Of course I get some oil when I do drain the water but I thought it might help protect a little against rust-out.
As for pressure, when mine is on it is generally set full blast. I don't presently have a framing nailer or anything that powerful but I figure if depth setting doesn't do the job I can always reduce the pressure when nails come through and threaten the neighbours dog. . If I was Han Solo I'd probably pet my wookie ----- Original Message ----- From: Phil Parr To: blindhandyman@yahoogroups.com Sent: Monday, May 10, 2010 10:57 AM Subject: Re: [BlindHandyMan] using an air nailer and an air compressor I do drain the water out but, probably not often enough. Think I will go today and drain mine, thanks, Phil. [Non-text portions of this message have been removed] [Non-text portions of this message have been removed]