The upgrade is straight forward and simple. I don't think you need to change any of the configuration files. None get overwritten.
What spandsp version you running? spandsp.0.5.3.pre3 works with callweaver 1.2.0.1 without any problems with fax. All other version of spandsp tested had issues with t.38 fax. I'm still testing spandsp.0.5.3.pre12 with callweaver 1.2.1. For production, we're currently using callweaver 1.2.0.1 with spandsp.0.5.3.pre3. If you're still using zaptel, upgrade to dahdi. G On Tue, 2009-06-02 at 12:34 -0400, Eric Chatham wrote: > Hello, > > > > I’m new to Callweaver. First, are there any good sources out there to > read up on for Callweaver? Secondly, we currently are running > Callweaver 1.9.99, and would like to upgrade to 1.2.1. What would we > need to do to do the upgrade? We are using CentOS (RHEL 5.1) as the > OS. Lastly, we are having a problem with our current version of > Callweaver. I attached a PCAP capture (fax.cap ^). Between frames > 513 and 597, we see excessive “fcs-OKs.” This happens several times > throughout the capture. Our Callweaver Server IP address is > 66.243.109.116. > > > > As for upgrading to 1.2.1, what is the procedure? What files would I > need to backup before this just in case they getting written over with > the upgrade. > > > > Thank you for your help, > > > > Eric Chatham > > > > > > ______________________________________________________________________ > CONFIDENTIAL. This e-mail and any attached files are confidential and > should be destroyed and/or returned if you are not the intended and > proper recipient. > _______________________________________________ > Callweaver-users mailing list > [email protected] > http://lists.callweaver.org/mailman/listinfo/callweaver-users _______________________________________________ Callweaver-users mailing list [email protected] http://lists.callweaver.org/mailman/listinfo/callweaver-users
