On 24 Feb 2008, at 21:27, Roger Millin wrote:
> If the revs fall below the level at which sufficient power is generated
> for the demand then the TP unit cuts out and the washing machine waits
> until the power is at an adequate level again. Been there, done that
> and got the (clean) French T shirt ;-))
>
Our prob is that the TP feeds through a Victron Multi, and if the TP
cuts out the Multi switches to invert, decides it's in overload and
cuts out, the TP now doesn't see a load and comes in, overloads, cuts
out...
If refitting now, I think I'd go the high output DC alt/inverter set up
rather than getting these TP vs Victron fights.
––
All the best
Bruce
"Never stay up on the barren heights of cleverness, but come down into
the green valleys of silliness.” Ludwig Wittgenstein
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/canals-list/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/canals-list/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
