Hi Adam I will try these files! Do I run the startup.m file in matlab as well?
Have a nice day Heystek On Mon, Aug 15, 2016 at 9:04 AM, Adam Isaacson <aisaac...@ska.ac.za> wrote: > Hi Heystek, > > No worries. I was in your position just a few months ago :). I have > attached my matlab startup scripts (startsg and startup.m). These must be > placed in the "mlib_devel" directory. You will probably have to change the > paths to where your installs are. > > All you need to do is the following: > > 1) Startup matlab R2012b, by running the startsg script. Using the Ubuntu > terminal, in the "mlib_devel" directory type: "./startsg". This should > startup matlab. There should be a message saying that "system generator > currently found installed in matlab default path..." > 2) Type in "simulink" in the command window. > 3) The Simulink Library Browser will open. Browse to where your model is > located and select the *.slx file. > 4) The model should open. Press "Ctrl + D" to check for any errors. There > should be no errors. > 5) Type in "casper_xps" in the command window. The casper XPS window > should pop up. Make sure all boxes are ticked under "ISE Design Flow > Choice:" and then click on "Run XPS". This will run the system generator as > part of the process, the Xilinx ISE and generate the relevant bit, fpg > files. > > I have also attached scripts if you just want to run the programs > individually - you will need to edit the path to where your installs are. > > Good luck. This should get you going. If the scripts bomb out then it is > likely that your paths are not correct - check that first. > > Kind Regards, > > Adam > > On Sun, Aug 14, 2016 at 8:26 PM, Heystek Grobler <heystekgrob...@gmail.com > > wrote: > >> Hi Adam >> >> I got ISE to run. It open up die GUI. How do I start the sysgen with >> MATLAB? >> >> Sorry about the queations. >> >> Thank you for your help >> >> Heystek >> >> On Sun, Aug 14, 2016 at 12:06 PM, Heystek Grobler < >> heystekgrob...@gmail.com> wrote: >> >>> Good day Adam >>> >>> I have been working through the documents you send me. I cant open the >>> ISE IDE. As soon as I run the script I get the following error: >>> >>> command not found >>> >>> I am new to Linux and Xilinx. >>> >>> Have a good day >>> >>> Heystek >>> >>> On Mon, Aug 8, 2016 at 3:31 PM, Adam Isaacson <aisaac...@ska.ac.za> >>> wrote: >>> >>>> Hi Heystek, >>>> >>>> You mentioned that you were using the ROACH2 board. This contains a >>>> Virtex 6 device. Vivado only works with Virtex 7 onwards. I would suggest >>>> if you are going to target the ROACH 2 that you use Xilinx ISE 14.7. >>>> >>>> You will need to work with ISE 14.7 and not Vivado. We have just begun >>>> to use Vivado for our Virtex 7 board e.g SKARAB. As far as I am aware, all >>>> the the ROACH2 development in SKA-SA has been done using Xilinx ISE 14., as >>>> it supports Virtex 6 devices. >>>> >>>> Kind Regards, >>>> >>>> Adam >>>> >>>> >>>> >>>> >>>> >>>> On Mon, Aug 8, 2016 at 3:13 PM, Heystek Grobler < >>>> heystekgrob...@gmail.com> wrote: >>>> >>>>> Good day Adam >>>>> >>>>> I am using Ubuntu 14.04 LTS with MATLAB 2012B. Im using the Vivado >>>>> suite that came with a Zed-Board (Vivado 2013.4). >>>>> >>>>> The error I am receiving from MATLAB at startup is: >>>>> Undefined function 'lAddSysgen' for input arguments of type 'char'. >>>>> > In matlabrc at 205 >>>>> >>>>> The errors I get from the system generator is: >>>>> 1. Design Error - Default block diagram >>>>> 2. Block Error - AddSub >>>>> >>>>> These errors occurs with the first tutorial from CASPER. >>>>> >>>>> I looked at the "tweaks to compile" but everything seems ok. >>>>> >>>>> I will use the guides you have attached in the previous email. >>>>> >>>>> I appreciate your help!! >>>>> >>>>> Heystek >>>>> >>>>> On Mon, Aug 8, 2016 at 2:30 PM, Adam Isaacson <aisaac...@ska.ac.za> >>>>> wrote: >>>>> >>>>>> Apologies, that should of been Ubuntu 14.04 LTS and Matlab R2015b... >>>>>> >>>>>> On Mon, Aug 8, 2016 at 2:28 PM, Adam Isaacson <aisaac...@ska.ac.za> >>>>>> wrote: >>>>>> >>>>>>> Hi Heystek, >>>>>>> >>>>>>> What OS are you using? I am using Ubuntu 4.04 LTS. What repo are you >>>>>>> using? I am using https://github.com/ska-sa/mlib_devel. What >>>>>>> version of Matlab and Xilinx are you using? I am using Matlab R2012b and >>>>>>> R2105b. I am using Xilinx ISE 14.7. I wrote these How To docs which may >>>>>>> or >>>>>>> may not come in handy. >>>>>>> >>>>>>> 1) Matlab 2012b and 2015b Installation: >>>>>>> https://drive.google.com/open?id=18BBkoWlSGeuK8BV1UlSnRJIYzl >>>>>>> OEWUhqTlF_zAePTj0 >>>>>>> >>>>>>> 2) Xilinx ISE 14.7 Installation: >>>>>>> https://drive.google.com/open?id=1o7Wl7wzB7VE1Cckk60B35WerJv >>>>>>> l5crXa7Q5xbcoYgE0 >>>>>>> >>>>>>> This should be read in conjunction with the CASPER wiki page - >>>>>>> https://casper.berkeley.edu/wiki/MSSGE_Setup_with_Xilinx_1 >>>>>>> 4.x_and_Matlab_2012b - did you follow "tweaks to be able to >>>>>>> compile"? >>>>>>> >>>>>>> Kind Regards, >>>>>>> >>>>>>> Adam >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> On Mon, Aug 8, 2016 at 1:53 PM, Heystek Grobler < >>>>>>> heystekgrob...@gmail.com> wrote: >>>>>>> >>>>>>>> Good Day >>>>>>>> >>>>>>>> My name is Heystek Grobler. I am an electrical en electronic >>>>>>>> engineering science student and for my final year project (skripsie) >>>>>>>> I'm >>>>>>>> developing a wideband spectrometer on a ROACH-2 board. >>>>>>>> >>>>>>>> Currently I have a problem with Xilinx System Generator and MATLAB. >>>>>>>> The Simulink Model runs as a simulation but as soon as I run it in >>>>>>>> Xilinx >>>>>>>> System Generator to compile it for the board it crashes and gives a >>>>>>>> "design >>>>>>>> error" as and "block error". >>>>>>>> >>>>>>>> I was hoping that if possible, that you could provide me with >>>>>>>> assistance to get Xilinx and Simulink up and running. So far I >>>>>>>> followed the >>>>>>>> CASPER tutorials but got stuck with this problem/ >>>>>>>> >>>>>>>> I hope to hear from you soon. >>>>>>>> >>>>>>>> Have a wonderful day >>>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> >>>>>>> Adam Isaacson >>>>>>> >>>>>>> DBE: FPGA Engineer >>>>>>> >>>>>>> SKA-SA >>>>>>> >>>>>>> 3rd Floor >>>>>>> >>>>>>> The Park >>>>>>> >>>>>>> Park Road >>>>>>> >>>>>>> Pinelands >>>>>>> >>>>>>> 7405 >>>>>>> >>>>>>> >>>>>>> Tel: +27215067300 (W) >>>>>>> >>>>>>> Fax: +27215067375 (W) >>>>>>> >>>>>>> Cell: +27825639602 >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> >>>>>> Adam Isaacson >>>>>> >>>>>> DBE: FPGA Engineer >>>>>> >>>>>> SKA-SA >>>>>> >>>>>> 3rd Floor >>>>>> >>>>>> The Park >>>>>> >>>>>> Park Road >>>>>> >>>>>> Pinelands >>>>>> >>>>>> 7405 >>>>>> >>>>>> >>>>>> Tel: +27215067300 (W) >>>>>> >>>>>> Fax: +27215067375 (W) >>>>>> >>>>>> Cell: +27825639602 >>>>>> >>>>> >>>>> >>>> >>>> >>>> -- >>>> >>>> Adam Isaacson >>>> >>>> DBE: FPGA Engineer >>>> >>>> SKA-SA >>>> >>>> 3rd Floor >>>> >>>> The Park >>>> >>>> Park Road >>>> >>>> Pinelands >>>> >>>> 7405 >>>> >>>> >>>> Tel: +27215067300 (W) >>>> >>>> Fax: +27215067375 (W) >>>> >>>> Cell: +27825639602 >>>> >>> >>> >> > > > -- > > Adam Isaacson > > DBE: FPGA Engineer > > SKA-SA > > 3rd Floor > > The Park > > Park Road > > Pinelands > > 7405 > > > Tel: +27215067300 (W) > > Fax: +27215067375 (W) > > Cell: +27825639602 >
