Hi Adam and James

I am working on my personal computer. I will ask a IT guy to help me with
the privileges and also clone the mlib-devel into the home directory and
try to run it again.

Thanks for all your help.

Heystek

On Mon, Aug 15, 2016 at 12:58 PM, Adam Isaacson <[email protected]> wrote:

> Hi Heystek,
>
> This issue is not with your script, but your linux permissions. I suggest
> you follow what James suggests. The fact that you can't run sudo though
> means that you may need your IT guy to give you sudo rights, but if you are
> working off the university server that may be an issue - as James says, you
> shouldn't need this if you install into your home directory.
>
> Kind Regards,
>
> Adam
>
> On Mon, Aug 15, 2016 at 11:27 AM, James Smith <[email protected]> wrote:
>
>> Hello Heystek,
>>
>> It would be a bit easier to debug if you posted the terminal session,
>> along with the commands you ran.
>>
>> Also, please run "ls -l" in the directory and post that as well. It might
>> just be that you need to give the file executable permissions.
>>
>> Regards,
>> James
>>
>>
>> On Mon, Aug 15, 2016 at 11:24 AM, Heystek Grobler <
>> [email protected]> wrote:
>>
>>> Hi Adam
>>>
>>> I modified the startsg file. When I run it I get the error in the
>>> terminal "Permission denied". When I run the startsg file as sudo I get the
>>> error "command not found".
>>>
>>> I have attached my modified startsg file.
>>>
>>> Do you perhaps have any ideas of how to solve it?
>>>
>>> Sorry for the inconvenience
>>>
>>> Heystek
>>>
>>> On Mon, Aug 15, 2016 at 11:10 AM, Adam Isaacson <[email protected]>
>>> wrote:
>>>
>>>> Hi Heystek,
>>>>
>>>> Nope, just run the ./startsg and matlab will run the startup.m file for
>>>> you when it opens. You should already have both the startsg and startup.m
>>>> files, but I gave you mine as I know it works.
>>>>
>>>> Kind Regards,
>>>>
>>>> Adam
>>>>
>>>> On Mon, Aug 15, 2016 at 10:58 AM, Heystek Grobler <
>>>> [email protected]> wrote:
>>>>
>>>>> Hi Adam
>>>>>
>>>>> I will try these files! Do I run the startup.m file in matlab as well?
>>>>>
>>>>> Have a nice day
>>>>>
>>>>> Heystek
>>>>>
>>>>> On Mon, Aug 15, 2016 at 9:04 AM, Adam Isaacson <[email protected]>
>>>>> wrote:
>>>>>
>>>>>> Hi Heystek,
>>>>>>
>>>>>> No worries. I was in your position just a few months ago :). I have
>>>>>> attached my matlab startup scripts (startsg and startup.m). These must be
>>>>>> placed in the "mlib_devel" directory. You will probably have to change 
>>>>>> the
>>>>>> paths to where your installs are.
>>>>>>
>>>>>> All you need to do is the following:
>>>>>>
>>>>>> 1) Startup matlab R2012b, by running the startsg script. Using the
>>>>>> Ubuntu terminal, in the "mlib_devel" directory type: "./startsg". This
>>>>>> should startup matlab. There should be a message saying that "system
>>>>>> generator currently found installed in matlab default path..."
>>>>>> 2) Type in "simulink" in the command window.
>>>>>> 3) The Simulink Library Browser will open. Browse to where your model
>>>>>> is located and select the *.slx file.
>>>>>> 4) The model should open. Press "Ctrl + D" to check for any errors.
>>>>>> There should be no errors.
>>>>>> 5) Type in "casper_xps" in the command window. The casper XPS window
>>>>>> should pop up. Make sure all boxes are ticked under "ISE Design Flow
>>>>>> Choice:" and then click on "Run XPS". This will run the system generator 
>>>>>> as
>>>>>> part of the process, the Xilinx ISE and generate the relevant bit, fpg
>>>>>> files.
>>>>>>
>>>>>> I have also attached scripts if you just want to run the programs
>>>>>> individually - you will need to edit the path to where your installs are.
>>>>>>
>>>>>> Good luck. This should get you going. If the scripts bomb out then it
>>>>>> is likely that your paths are not correct - check that first.
>>>>>>
>>>>>> Kind Regards,
>>>>>>
>>>>>> Adam
>>>>>>
>>>>>> On Sun, Aug 14, 2016 at 8:26 PM, Heystek Grobler <
>>>>>> [email protected]> wrote:
>>>>>>
>>>>>>> Hi Adam
>>>>>>>
>>>>>>> I got ISE to run. It open up die GUI. How do I start the sysgen with
>>>>>>> MATLAB?
>>>>>>>
>>>>>>> Sorry about the queations.
>>>>>>>
>>>>>>> Thank you for your help
>>>>>>>
>>>>>>> Heystek
>>>>>>>
>>>>>>> On Sun, Aug 14, 2016 at 12:06 PM, Heystek Grobler <
>>>>>>> [email protected]> wrote:
>>>>>>>
>>>>>>>> Good day Adam
>>>>>>>>
>>>>>>>> I have been working through the documents you send me. I cant open
>>>>>>>> the ISE IDE. As soon as I run the script I get the following error:
>>>>>>>>
>>>>>>>> command not found
>>>>>>>>
>>>>>>>> I am new to Linux and Xilinx.
>>>>>>>>
>>>>>>>> Have a good day
>>>>>>>>
>>>>>>>> Heystek
>>>>>>>>
>>>>>>>> On Mon, Aug 8, 2016 at 3:31 PM, Adam Isaacson <[email protected]>
>>>>>>>> wrote:
>>>>>>>>
>>>>>>>>> Hi Heystek,
>>>>>>>>>
>>>>>>>>> You mentioned that you were using the ROACH2 board. This contains
>>>>>>>>> a Virtex 6 device. Vivado only works with Virtex 7 onwards. I would 
>>>>>>>>> suggest
>>>>>>>>> if you are going to target the ROACH 2 that you use Xilinx ISE 14.7.
>>>>>>>>>
>>>>>>>>> You will need to work with ISE 14.7 and not Vivado.  We have just
>>>>>>>>> begun to use Vivado for our Virtex 7 board e.g  SKARAB. As far as I am
>>>>>>>>> aware, all the the ROACH2 development in SKA-SA has been done using 
>>>>>>>>> Xilinx
>>>>>>>>> ISE 14., as it supports Virtex 6 devices.
>>>>>>>>>
>>>>>>>>> Kind Regards,
>>>>>>>>>
>>>>>>>>> Adam
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Mon, Aug 8, 2016 at 3:13 PM, Heystek Grobler <
>>>>>>>>> [email protected]> wrote:
>>>>>>>>>
>>>>>>>>>> Good day Adam
>>>>>>>>>>
>>>>>>>>>> I am using Ubuntu 14.04 LTS with MATLAB 2012B. Im using the
>>>>>>>>>> Vivado suite that came with a Zed-Board (Vivado 2013.4).
>>>>>>>>>>
>>>>>>>>>> The error I am receiving from MATLAB at startup is:
>>>>>>>>>> Undefined function 'lAddSysgen' for input arguments of type
>>>>>>>>>> 'char'.
>>>>>>>>>> > In matlabrc at 205
>>>>>>>>>>
>>>>>>>>>> The errors I get from the system generator is:
>>>>>>>>>> 1. Design Error - Default block diagram
>>>>>>>>>> 2. Block Error - AddSub
>>>>>>>>>>
>>>>>>>>>> These errors occurs with the first tutorial from CASPER.
>>>>>>>>>>
>>>>>>>>>> I looked at the "tweaks to compile" but everything seems ok.
>>>>>>>>>>
>>>>>>>>>> I will use the guides you have attached in the previous email.
>>>>>>>>>>
>>>>>>>>>> I appreciate your help!!
>>>>>>>>>>
>>>>>>>>>> Heystek
>>>>>>>>>>
>>>>>>>>>> On Mon, Aug 8, 2016 at 2:30 PM, Adam Isaacson <
>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>
>>>>>>>>>>> Apologies, that should of been Ubuntu 14.04 LTS and Matlab
>>>>>>>>>>> R2015b...
>>>>>>>>>>>
>>>>>>>>>>> On Mon, Aug 8, 2016 at 2:28 PM, Adam Isaacson <
>>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hi Heystek,
>>>>>>>>>>>>
>>>>>>>>>>>> What OS are you using? I am using Ubuntu 4.04 LTS. What repo
>>>>>>>>>>>> are you using? I am using https://github.com/ska-sa/mlib_devel.
>>>>>>>>>>>> What version of Matlab and Xilinx are you using? I am using Matlab 
>>>>>>>>>>>> R2012b
>>>>>>>>>>>> and R2105b. I am using Xilinx ISE 14.7. I wrote these How To docs 
>>>>>>>>>>>> which may
>>>>>>>>>>>> or may not come in handy.
>>>>>>>>>>>>
>>>>>>>>>>>> 1) Matlab 2012b and 2015b Installation:
>>>>>>>>>>>> https://drive.google.com/open?id=18BBkoWlSGeuK8BV1UlSnRJIYzl
>>>>>>>>>>>> OEWUhqTlF_zAePTj0
>>>>>>>>>>>>
>>>>>>>>>>>> 2) Xilinx ISE 14.7 Installation:
>>>>>>>>>>>> https://drive.google.com/open?id=1o7Wl7wzB7VE1Cckk60B35WerJv
>>>>>>>>>>>> l5crXa7Q5xbcoYgE0
>>>>>>>>>>>>
>>>>>>>>>>>> This should be read in conjunction with the CASPER wiki page -
>>>>>>>>>>>> https://casper.berkeley.edu/wiki/MSSGE_Setup_with_Xilinx_1
>>>>>>>>>>>> 4.x_and_Matlab_2012b - did you follow "tweaks to be able to
>>>>>>>>>>>> compile"?
>>>>>>>>>>>>
>>>>>>>>>>>> Kind Regards,
>>>>>>>>>>>>
>>>>>>>>>>>> Adam
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Mon, Aug 8, 2016 at 1:53 PM, Heystek Grobler <
>>>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Good Day
>>>>>>>>>>>>>
>>>>>>>>>>>>> My name is Heystek Grobler. I am an electrical en electronic
>>>>>>>>>>>>> engineering science student and for my final year project 
>>>>>>>>>>>>> (skripsie) I'm
>>>>>>>>>>>>> developing a wideband spectrometer on a ROACH-2 board.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Currently I have a problem with Xilinx System Generator and
>>>>>>>>>>>>> MATLAB. The Simulink Model runs as a simulation but as soon as I 
>>>>>>>>>>>>> run it in
>>>>>>>>>>>>> Xilinx System Generator to compile it for the board it crashes 
>>>>>>>>>>>>> and gives a
>>>>>>>>>>>>> "design error" as and "block error".
>>>>>>>>>>>>>
>>>>>>>>>>>>> I was hoping that if possible, that you could provide me with
>>>>>>>>>>>>> assistance to get Xilinx and Simulink up and running. So far I 
>>>>>>>>>>>>> followed the
>>>>>>>>>>>>> CASPER tutorials but got stuck with this problem/
>>>>>>>>>>>>>
>>>>>>>>>>>>> I hope to hear from you soon.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Have a wonderful day
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>>
>>>>>>>>>>>> Adam Isaacson
>>>>>>>>>>>>
>>>>>>>>>>>> DBE: FPGA Engineer
>>>>>>>>>>>>
>>>>>>>>>>>> SKA-SA
>>>>>>>>>>>>
>>>>>>>>>>>> 3rd Floor
>>>>>>>>>>>>
>>>>>>>>>>>> The Park
>>>>>>>>>>>>
>>>>>>>>>>>> Park Road
>>>>>>>>>>>>
>>>>>>>>>>>> Pinelands
>>>>>>>>>>>>
>>>>>>>>>>>> 7405
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Tel: +27215067300 (W)
>>>>>>>>>>>>
>>>>>>>>>>>> Fax: +27215067375 (W)
>>>>>>>>>>>>
>>>>>>>>>>>> Cell: +27825639602
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>>
>>>>>>>>>>> Adam Isaacson
>>>>>>>>>>>
>>>>>>>>>>> DBE: FPGA Engineer
>>>>>>>>>>>
>>>>>>>>>>> SKA-SA
>>>>>>>>>>>
>>>>>>>>>>> 3rd Floor
>>>>>>>>>>>
>>>>>>>>>>> The Park
>>>>>>>>>>>
>>>>>>>>>>> Park Road
>>>>>>>>>>>
>>>>>>>>>>> Pinelands
>>>>>>>>>>>
>>>>>>>>>>> 7405
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Tel: +27215067300 (W)
>>>>>>>>>>>
>>>>>>>>>>> Fax: +27215067375 (W)
>>>>>>>>>>>
>>>>>>>>>>> Cell: +27825639602
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>>
>>>>>>>>> Adam Isaacson
>>>>>>>>>
>>>>>>>>> DBE: FPGA Engineer
>>>>>>>>>
>>>>>>>>> SKA-SA
>>>>>>>>>
>>>>>>>>> 3rd Floor
>>>>>>>>>
>>>>>>>>> The Park
>>>>>>>>>
>>>>>>>>> Park Road
>>>>>>>>>
>>>>>>>>> Pinelands
>>>>>>>>>
>>>>>>>>> 7405
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Tel: +27215067300 (W)
>>>>>>>>>
>>>>>>>>> Fax: +27215067375 (W)
>>>>>>>>>
>>>>>>>>> Cell: +27825639602
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>>
>>>>>> Adam Isaacson
>>>>>>
>>>>>> DBE: FPGA Engineer
>>>>>>
>>>>>> SKA-SA
>>>>>>
>>>>>> 3rd Floor
>>>>>>
>>>>>> The Park
>>>>>>
>>>>>> Park Road
>>>>>>
>>>>>> Pinelands
>>>>>>
>>>>>> 7405
>>>>>>
>>>>>>
>>>>>> Tel: +27215067300 (W)
>>>>>>
>>>>>> Fax: +27215067375 (W)
>>>>>>
>>>>>> Cell: +27825639602
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>>
>>>> Adam Isaacson
>>>>
>>>> DBE: FPGA Engineer
>>>>
>>>> SKA-SA
>>>>
>>>> 3rd Floor
>>>>
>>>> The Park
>>>>
>>>> Park Road
>>>>
>>>> Pinelands
>>>>
>>>> 7405
>>>>
>>>>
>>>> Tel: +27215067300 (W)
>>>>
>>>> Fax: +27215067375 (W)
>>>>
>>>> Cell: +27825639602
>>>>
>>>
>>>
>>
>
>
> --
>
> Adam Isaacson
>
> DBE: FPGA Engineer
>
> SKA-SA
>
> 3rd Floor
>
> The Park
>
> Park Road
>
> Pinelands
>
> 7405
>
>
> Tel: +27215067300 (W)
>
> Fax: +27215067375 (W)
>
> Cell: +27825639602
>

Reply via email to