Hello Heystek, It would be a bit easier to debug if you posted the terminal session, along with the commands you ran.
Also, please run "ls -l" in the directory and post that as well. It might just be that you need to give the file executable permissions. Regards, James On Mon, Aug 15, 2016 at 11:24 AM, Heystek Grobler <heystekgrob...@gmail.com> wrote: > Hi Adam > > I modified the startsg file. When I run it I get the error in the terminal > "Permission denied". When I run the startsg file as sudo I get the error > "command not found". > > I have attached my modified startsg file. > > Do you perhaps have any ideas of how to solve it? > > Sorry for the inconvenience > > Heystek > > On Mon, Aug 15, 2016 at 11:10 AM, Adam Isaacson <aisaac...@ska.ac.za> > wrote: > >> Hi Heystek, >> >> Nope, just run the ./startsg and matlab will run the startup.m file for >> you when it opens. You should already have both the startsg and startup.m >> files, but I gave you mine as I know it works. >> >> Kind Regards, >> >> Adam >> >> On Mon, Aug 15, 2016 at 10:58 AM, Heystek Grobler < >> heystekgrob...@gmail.com> wrote: >> >>> Hi Adam >>> >>> I will try these files! Do I run the startup.m file in matlab as well? >>> >>> Have a nice day >>> >>> Heystek >>> >>> On Mon, Aug 15, 2016 at 9:04 AM, Adam Isaacson <aisaac...@ska.ac.za> >>> wrote: >>> >>>> Hi Heystek, >>>> >>>> No worries. I was in your position just a few months ago :). I have >>>> attached my matlab startup scripts (startsg and startup.m). These must be >>>> placed in the "mlib_devel" directory. You will probably have to change the >>>> paths to where your installs are. >>>> >>>> All you need to do is the following: >>>> >>>> 1) Startup matlab R2012b, by running the startsg script. Using the >>>> Ubuntu terminal, in the "mlib_devel" directory type: "./startsg". This >>>> should startup matlab. There should be a message saying that "system >>>> generator currently found installed in matlab default path..." >>>> 2) Type in "simulink" in the command window. >>>> 3) The Simulink Library Browser will open. Browse to where your model >>>> is located and select the *.slx file. >>>> 4) The model should open. Press "Ctrl + D" to check for any errors. >>>> There should be no errors. >>>> 5) Type in "casper_xps" in the command window. The casper XPS window >>>> should pop up. Make sure all boxes are ticked under "ISE Design Flow >>>> Choice:" and then click on "Run XPS". This will run the system generator as >>>> part of the process, the Xilinx ISE and generate the relevant bit, fpg >>>> files. >>>> >>>> I have also attached scripts if you just want to run the programs >>>> individually - you will need to edit the path to where your installs are. >>>> >>>> Good luck. This should get you going. If the scripts bomb out then it >>>> is likely that your paths are not correct - check that first. >>>> >>>> Kind Regards, >>>> >>>> Adam >>>> >>>> On Sun, Aug 14, 2016 at 8:26 PM, Heystek Grobler < >>>> heystekgrob...@gmail.com> wrote: >>>> >>>>> Hi Adam >>>>> >>>>> I got ISE to run. It open up die GUI. How do I start the sysgen with >>>>> MATLAB? >>>>> >>>>> Sorry about the queations. >>>>> >>>>> Thank you for your help >>>>> >>>>> Heystek >>>>> >>>>> On Sun, Aug 14, 2016 at 12:06 PM, Heystek Grobler < >>>>> heystekgrob...@gmail.com> wrote: >>>>> >>>>>> Good day Adam >>>>>> >>>>>> I have been working through the documents you send me. I cant open >>>>>> the ISE IDE. As soon as I run the script I get the following error: >>>>>> >>>>>> command not found >>>>>> >>>>>> I am new to Linux and Xilinx. >>>>>> >>>>>> Have a good day >>>>>> >>>>>> Heystek >>>>>> >>>>>> On Mon, Aug 8, 2016 at 3:31 PM, Adam Isaacson <aisaac...@ska.ac.za> >>>>>> wrote: >>>>>> >>>>>>> Hi Heystek, >>>>>>> >>>>>>> You mentioned that you were using the ROACH2 board. This contains a >>>>>>> Virtex 6 device. Vivado only works with Virtex 7 onwards. I would >>>>>>> suggest >>>>>>> if you are going to target the ROACH 2 that you use Xilinx ISE 14.7. >>>>>>> >>>>>>> You will need to work with ISE 14.7 and not Vivado. We have just >>>>>>> begun to use Vivado for our Virtex 7 board e.g SKARAB. As far as I am >>>>>>> aware, all the the ROACH2 development in SKA-SA has been done using >>>>>>> Xilinx >>>>>>> ISE 14., as it supports Virtex 6 devices. >>>>>>> >>>>>>> Kind Regards, >>>>>>> >>>>>>> Adam >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> On Mon, Aug 8, 2016 at 3:13 PM, Heystek Grobler < >>>>>>> heystekgrob...@gmail.com> wrote: >>>>>>> >>>>>>>> Good day Adam >>>>>>>> >>>>>>>> I am using Ubuntu 14.04 LTS with MATLAB 2012B. Im using the Vivado >>>>>>>> suite that came with a Zed-Board (Vivado 2013.4). >>>>>>>> >>>>>>>> The error I am receiving from MATLAB at startup is: >>>>>>>> Undefined function 'lAddSysgen' for input arguments of type 'char'. >>>>>>>> > In matlabrc at 205 >>>>>>>> >>>>>>>> The errors I get from the system generator is: >>>>>>>> 1. Design Error - Default block diagram >>>>>>>> 2. Block Error - AddSub >>>>>>>> >>>>>>>> These errors occurs with the first tutorial from CASPER. >>>>>>>> >>>>>>>> I looked at the "tweaks to compile" but everything seems ok. >>>>>>>> >>>>>>>> I will use the guides you have attached in the previous email. >>>>>>>> >>>>>>>> I appreciate your help!! >>>>>>>> >>>>>>>> Heystek >>>>>>>> >>>>>>>> On Mon, Aug 8, 2016 at 2:30 PM, Adam Isaacson <aisaac...@ska.ac.za> >>>>>>>> wrote: >>>>>>>> >>>>>>>>> Apologies, that should of been Ubuntu 14.04 LTS and Matlab >>>>>>>>> R2015b... >>>>>>>>> >>>>>>>>> On Mon, Aug 8, 2016 at 2:28 PM, Adam Isaacson <aisaac...@ska.ac.za >>>>>>>>> > wrote: >>>>>>>>> >>>>>>>>>> Hi Heystek, >>>>>>>>>> >>>>>>>>>> What OS are you using? I am using Ubuntu 4.04 LTS. What repo are >>>>>>>>>> you using? I am using https://github.com/ska-sa/mlib_devel. What >>>>>>>>>> version of Matlab and Xilinx are you using? I am using Matlab R2012b >>>>>>>>>> and >>>>>>>>>> R2105b. I am using Xilinx ISE 14.7. I wrote these How To docs which >>>>>>>>>> may or >>>>>>>>>> may not come in handy. >>>>>>>>>> >>>>>>>>>> 1) Matlab 2012b and 2015b Installation: >>>>>>>>>> https://drive.google.com/open?id=18BBkoWlSGeuK8BV1UlSnRJIYzl >>>>>>>>>> OEWUhqTlF_zAePTj0 >>>>>>>>>> >>>>>>>>>> 2) Xilinx ISE 14.7 Installation: >>>>>>>>>> https://drive.google.com/open?id=1o7Wl7wzB7VE1Cckk60B35WerJv >>>>>>>>>> l5crXa7Q5xbcoYgE0 >>>>>>>>>> >>>>>>>>>> This should be read in conjunction with the CASPER wiki page - >>>>>>>>>> https://casper.berkeley.edu/wiki/MSSGE_Setup_with_Xilinx_1 >>>>>>>>>> 4.x_and_Matlab_2012b - did you follow "tweaks to be able to >>>>>>>>>> compile"? >>>>>>>>>> >>>>>>>>>> Kind Regards, >>>>>>>>>> >>>>>>>>>> Adam >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Mon, Aug 8, 2016 at 1:53 PM, Heystek Grobler < >>>>>>>>>> heystekgrob...@gmail.com> wrote: >>>>>>>>>> >>>>>>>>>>> Good Day >>>>>>>>>>> >>>>>>>>>>> My name is Heystek Grobler. I am an electrical en electronic >>>>>>>>>>> engineering science student and for my final year project >>>>>>>>>>> (skripsie) I'm >>>>>>>>>>> developing a wideband spectrometer on a ROACH-2 board. >>>>>>>>>>> >>>>>>>>>>> Currently I have a problem with Xilinx System Generator and >>>>>>>>>>> MATLAB. The Simulink Model runs as a simulation but as soon as I >>>>>>>>>>> run it in >>>>>>>>>>> Xilinx System Generator to compile it for the board it crashes and >>>>>>>>>>> gives a >>>>>>>>>>> "design error" as and "block error". >>>>>>>>>>> >>>>>>>>>>> I was hoping that if possible, that you could provide me with >>>>>>>>>>> assistance to get Xilinx and Simulink up and running. So far I >>>>>>>>>>> followed the >>>>>>>>>>> CASPER tutorials but got stuck with this problem/ >>>>>>>>>>> >>>>>>>>>>> I hope to hear from you soon. >>>>>>>>>>> >>>>>>>>>>> Have a wonderful day >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> >>>>>>>>>> Adam Isaacson >>>>>>>>>> >>>>>>>>>> DBE: FPGA Engineer >>>>>>>>>> >>>>>>>>>> SKA-SA >>>>>>>>>> >>>>>>>>>> 3rd Floor >>>>>>>>>> >>>>>>>>>> The Park >>>>>>>>>> >>>>>>>>>> Park Road >>>>>>>>>> >>>>>>>>>> Pinelands >>>>>>>>>> >>>>>>>>>> 7405 >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Tel: +27215067300 (W) >>>>>>>>>> >>>>>>>>>> Fax: +27215067375 (W) >>>>>>>>>> >>>>>>>>>> Cell: +27825639602 >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> >>>>>>>>> Adam Isaacson >>>>>>>>> >>>>>>>>> DBE: FPGA Engineer >>>>>>>>> >>>>>>>>> SKA-SA >>>>>>>>> >>>>>>>>> 3rd Floor >>>>>>>>> >>>>>>>>> The Park >>>>>>>>> >>>>>>>>> Park Road >>>>>>>>> >>>>>>>>> Pinelands >>>>>>>>> >>>>>>>>> 7405 >>>>>>>>> >>>>>>>>> >>>>>>>>> Tel: +27215067300 (W) >>>>>>>>> >>>>>>>>> Fax: +27215067375 (W) >>>>>>>>> >>>>>>>>> Cell: +27825639602 >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> >>>>>>> Adam Isaacson >>>>>>> >>>>>>> DBE: FPGA Engineer >>>>>>> >>>>>>> SKA-SA >>>>>>> >>>>>>> 3rd Floor >>>>>>> >>>>>>> The Park >>>>>>> >>>>>>> Park Road >>>>>>> >>>>>>> Pinelands >>>>>>> >>>>>>> 7405 >>>>>>> >>>>>>> >>>>>>> Tel: +27215067300 (W) >>>>>>> >>>>>>> Fax: +27215067375 (W) >>>>>>> >>>>>>> Cell: +27825639602 >>>>>>> >>>>>> >>>>>> >>>>> >>>> >>>> >>>> -- >>>> >>>> Adam Isaacson >>>> >>>> DBE: FPGA Engineer >>>> >>>> SKA-SA >>>> >>>> 3rd Floor >>>> >>>> The Park >>>> >>>> Park Road >>>> >>>> Pinelands >>>> >>>> 7405 >>>> >>>> >>>> Tel: +27215067300 (W) >>>> >>>> Fax: +27215067375 (W) >>>> >>>> Cell: +27825639602 >>>> >>> >>> >> >> >> -- >> >> Adam Isaacson >> >> DBE: FPGA Engineer >> >> SKA-SA >> >> 3rd Floor >> >> The Park >> >> Park Road >> >> Pinelands >> >> 7405 >> >> >> Tel: +27215067300 (W) >> >> Fax: +27215067375 (W) >> >> Cell: +27825639602 >> > >
