Hello Heystek,

It shouldn't matter between .mdl and .slx. Your error there is a bit more
interesting, I'm not sure how to go about solving it or indeed what
information would be needed.

A bit more context information will probably help the other gurus on this
list to assist you though.

Regards,
James


On Tue, Aug 16, 2016 at 9:02 PM, Heystek Grobler <[email protected]>
wrote:

> Hi James
>
> I tried the command and it accepted it. The matlab terminal gives the
> following error:
>
> Error using gen_xps_files(362)
>
> Does it make a diffirence if the simulink models are .mdl or .slx?
>
> Thank for your help
>
> Heystek
>
> On Tue, Aug 16, 2016 at 5:40 PM, James Smith <[email protected]> wrote:
>
>> Hello Heystek,
>>
>> Just to get you an answer quickly, try the following command:
>>
>> chmod 777 -R /home/heystek/Desktop/tut1
>>
>> If that command makes an error message then add sudo.
>> It's funny that you should have permissions issues there, if this doesn't
>> fix things then there might be stranger issues at play.
>>
>> Regards,
>> James
>>
>>
>> On Tue, Aug 16, 2016 at 5:36 PM, Heystek Grobler <
>> [email protected]> wrote:
>>
>>> Hi James and Adam
>>>
>>> I got it working. The chmod +x startsg command did the trick. I started
>>> with the first casper tutorial, but when the system generator compiles it
>>> the tutorial breaks. It gives two errors.
>>>
>>> 1. Design Error  DefaultBlockDiagram  System Generator   Caught standard
>>> exception
>>> 2. Block Error    AddSub                       System Generator
>>>
>>> The following error log was also generated:
>>>
>>> --------------------------------- Version Log
>>> ----------------------------------
>>> Version                                 Path
>>> System Generator                        /opt/Xilinx/14.7/ISE_DS/ISE/s
>>> ysgen
>>> Matlab 8.0.0.783 (R2012b)               /usr/local/MATLAB/R2012b
>>> ISE                                     /opt/Xilinx/14.7/ISE_DS/ISE
>>> ------------------------------------------------------------
>>> --------------------
>>> Summary of Errors:
>>> Error 0001: caught standard exception
>>>      Block: Unspecified
>>> ------------------------------------------------------------
>>> --------------------
>>>
>>> Error 0001:
>>>
>>> Reported by:
>>>   Unspecified
>>>
>>> Details:
>>> standard exception: XNetlistEngine:
>>> Exception message could not be parsed:
>>> com.xilinx.sysgen.netlist.NetlistInternal: couldn't open first
>>> pass text file at
>>> /home/heystek/Desktop/tut1/sysgen/sysgen/masterScript423796839757439882
>>> 5.pl
>>> line 559'
>>>
>>> ------------------------------------------------------------
>>> --------------------
>>>
>>> Do you perhaps have an idea how I can fix it?
>>>
>>> Thanks for all the help.
>>>
>>> Have a wonderful day.
>>>
>>> Heystek
>>>
>>>
>>> On Tue, Aug 16, 2016 at 8:07 AM, James Smith <[email protected]> wrote:
>>>
>>>> Hello Heystek,
>>>>
>>>> This should be a relatively trivial problem to solve:
>>>>
>>>> cd ~ # This is a shortcut for your home directory
>>>> git clone <URL of repository here - either the casper-astro one or the
>>>> SKA-SA one>
>>>> cd mlib-devel
>>>> ./startsg
>>>>
>>>> If that doesn't work, then do this:
>>>> chmod +x startsg
>>>>
>>>> Then you should be fine.
>>>>
>>>> Regards,
>>>> James
>>>>
>>>>
>>>> On Mon, Aug 15, 2016 at 7:46 PM, Heystek Grobler <
>>>> [email protected]> wrote:
>>>>
>>>>> Hi Adam and James
>>>>>
>>>>> I am working on my personal computer. I will ask a IT guy to help me
>>>>> with the privileges and also clone the mlib-devel into the home
>>>>> directory and try to run it again.
>>>>>
>>>>> Thanks for all your help.
>>>>>
>>>>> Heystek
>>>>>
>>>>> On Mon, Aug 15, 2016 at 12:58 PM, Adam Isaacson <[email protected]>
>>>>> wrote:
>>>>>
>>>>>> Hi Heystek,
>>>>>>
>>>>>> This issue is not with your script, but your linux permissions. I
>>>>>> suggest you follow what James suggests. The fact that you can't run sudo
>>>>>> though means that you may need your IT guy to give you sudo rights, but 
>>>>>> if
>>>>>> you are working off the university server that may be an issue - as James
>>>>>> says, you shouldn't need this if you install into your home directory.
>>>>>>
>>>>>> Kind Regards,
>>>>>>
>>>>>> Adam
>>>>>>
>>>>>> On Mon, Aug 15, 2016 at 11:27 AM, James Smith <[email protected]>
>>>>>> wrote:
>>>>>>
>>>>>>> Hello Heystek,
>>>>>>>
>>>>>>> It would be a bit easier to debug if you posted the terminal
>>>>>>> session, along with the commands you ran.
>>>>>>>
>>>>>>> Also, please run "ls -l" in the directory and post that as well. It
>>>>>>> might just be that you need to give the file executable permissions.
>>>>>>>
>>>>>>> Regards,
>>>>>>> James
>>>>>>>
>>>>>>>
>>>>>>> On Mon, Aug 15, 2016 at 11:24 AM, Heystek Grobler <
>>>>>>> [email protected]> wrote:
>>>>>>>
>>>>>>>> Hi Adam
>>>>>>>>
>>>>>>>> I modified the startsg file. When I run it I get the error in the
>>>>>>>> terminal "Permission denied". When I run the startsg file as sudo I 
>>>>>>>> get the
>>>>>>>> error "command not found".
>>>>>>>>
>>>>>>>> I have attached my modified startsg file.
>>>>>>>>
>>>>>>>> Do you perhaps have any ideas of how to solve it?
>>>>>>>>
>>>>>>>> Sorry for the inconvenience
>>>>>>>>
>>>>>>>> Heystek
>>>>>>>>
>>>>>>>> On Mon, Aug 15, 2016 at 11:10 AM, Adam Isaacson <
>>>>>>>> [email protected]> wrote:
>>>>>>>>
>>>>>>>>> Hi Heystek,
>>>>>>>>>
>>>>>>>>> Nope, just run the ./startsg and matlab will run the startup.m
>>>>>>>>> file for you when it opens. You should already have both the startsg 
>>>>>>>>> and
>>>>>>>>> startup.m files, but I gave you mine as I know it works.
>>>>>>>>>
>>>>>>>>> Kind Regards,
>>>>>>>>>
>>>>>>>>> Adam
>>>>>>>>>
>>>>>>>>> On Mon, Aug 15, 2016 at 10:58 AM, Heystek Grobler <
>>>>>>>>> [email protected]> wrote:
>>>>>>>>>
>>>>>>>>>> Hi Adam
>>>>>>>>>>
>>>>>>>>>> I will try these files! Do I run the startup.m file in matlab as
>>>>>>>>>> well?
>>>>>>>>>>
>>>>>>>>>> Have a nice day
>>>>>>>>>>
>>>>>>>>>> Heystek
>>>>>>>>>>
>>>>>>>>>> On Mon, Aug 15, 2016 at 9:04 AM, Adam Isaacson <
>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>
>>>>>>>>>>> Hi Heystek,
>>>>>>>>>>>
>>>>>>>>>>> No worries. I was in your position just a few months ago :). I
>>>>>>>>>>> have attached my matlab startup scripts (startsg and startup.m). 
>>>>>>>>>>> These must
>>>>>>>>>>> be placed in the "mlib_devel" directory. You will probably have to 
>>>>>>>>>>> change
>>>>>>>>>>> the paths to where your installs are.
>>>>>>>>>>>
>>>>>>>>>>> All you need to do is the following:
>>>>>>>>>>>
>>>>>>>>>>> 1) Startup matlab R2012b, by running the startsg script. Using
>>>>>>>>>>> the Ubuntu terminal, in the "mlib_devel" directory type: 
>>>>>>>>>>> "./startsg". This
>>>>>>>>>>> should startup matlab. There should be a message saying that "system
>>>>>>>>>>> generator currently found installed in matlab default path..."
>>>>>>>>>>> 2) Type in "simulink" in the command window.
>>>>>>>>>>> 3) The Simulink Library Browser will open. Browse to where your
>>>>>>>>>>> model is located and select the *.slx file.
>>>>>>>>>>> 4) The model should open. Press "Ctrl + D" to check for any
>>>>>>>>>>> errors. There should be no errors.
>>>>>>>>>>> 5) Type in "casper_xps" in the command window. The casper XPS
>>>>>>>>>>> window should pop up. Make sure all boxes are ticked under "ISE 
>>>>>>>>>>> Design Flow
>>>>>>>>>>> Choice:" and then click on "Run XPS". This will run the system 
>>>>>>>>>>> generator as
>>>>>>>>>>> part of the process, the Xilinx ISE and generate the relevant bit, 
>>>>>>>>>>> fpg
>>>>>>>>>>> files.
>>>>>>>>>>>
>>>>>>>>>>> I have also attached scripts if you just want to run the
>>>>>>>>>>> programs individually - you will need to edit the path to where your
>>>>>>>>>>> installs are.
>>>>>>>>>>>
>>>>>>>>>>> Good luck. This should get you going. If the scripts bomb out
>>>>>>>>>>> then it is likely that your paths are not correct - check that 
>>>>>>>>>>> first.
>>>>>>>>>>>
>>>>>>>>>>> Kind Regards,
>>>>>>>>>>>
>>>>>>>>>>> Adam
>>>>>>>>>>>
>>>>>>>>>>> On Sun, Aug 14, 2016 at 8:26 PM, Heystek Grobler <
>>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hi Adam
>>>>>>>>>>>>
>>>>>>>>>>>> I got ISE to run. It open up die GUI. How do I start the sysgen
>>>>>>>>>>>> with MATLAB?
>>>>>>>>>>>>
>>>>>>>>>>>> Sorry about the queations.
>>>>>>>>>>>>
>>>>>>>>>>>> Thank you for your help
>>>>>>>>>>>>
>>>>>>>>>>>> Heystek
>>>>>>>>>>>>
>>>>>>>>>>>> On Sun, Aug 14, 2016 at 12:06 PM, Heystek Grobler <
>>>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Good day Adam
>>>>>>>>>>>>>
>>>>>>>>>>>>> I have been working through the documents you send me. I cant
>>>>>>>>>>>>> open the ISE IDE. As soon as I run the script I get the following 
>>>>>>>>>>>>> error:
>>>>>>>>>>>>>
>>>>>>>>>>>>> command not found
>>>>>>>>>>>>>
>>>>>>>>>>>>> I am new to Linux and Xilinx.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Have a good day
>>>>>>>>>>>>>
>>>>>>>>>>>>> Heystek
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Mon, Aug 8, 2016 at 3:31 PM, Adam Isaacson <
>>>>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi Heystek,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> You mentioned that you were using the ROACH2 board. This
>>>>>>>>>>>>>> contains a Virtex 6 device. Vivado only works with Virtex 7 
>>>>>>>>>>>>>> onwards. I
>>>>>>>>>>>>>> would suggest if you are going to target the ROACH 2 that you 
>>>>>>>>>>>>>> use Xilinx
>>>>>>>>>>>>>> ISE 14.7.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> You will need to work with ISE 14.7 and not Vivado.  We have
>>>>>>>>>>>>>> just begun to use Vivado for our Virtex 7 board e.g  SKARAB. As 
>>>>>>>>>>>>>> far as I am
>>>>>>>>>>>>>> aware, all the the ROACH2 development in SKA-SA has been done 
>>>>>>>>>>>>>> using Xilinx
>>>>>>>>>>>>>> ISE 14., as it supports Virtex 6 devices.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Kind Regards,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Adam
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Mon, Aug 8, 2016 at 3:13 PM, Heystek Grobler <
>>>>>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Good day Adam
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I am using Ubuntu 14.04 LTS with MATLAB 2012B. Im using the
>>>>>>>>>>>>>>> Vivado suite that came with a Zed-Board (Vivado 2013.4).
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> The error I am receiving from MATLAB at startup is:
>>>>>>>>>>>>>>> Undefined function 'lAddSysgen' for input arguments of type
>>>>>>>>>>>>>>> 'char'.
>>>>>>>>>>>>>>> > In matlabrc at 205
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> The errors I get from the system generator is:
>>>>>>>>>>>>>>> 1. Design Error - Default block diagram
>>>>>>>>>>>>>>> 2. Block Error - AddSub
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> These errors occurs with the first tutorial from CASPER.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I looked at the "tweaks to compile" but everything seems ok.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I will use the guides you have attached in the previous
>>>>>>>>>>>>>>> email.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I appreciate your help!!
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Heystek
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Mon, Aug 8, 2016 at 2:30 PM, Adam Isaacson <
>>>>>>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Apologies, that should of been Ubuntu 14.04 LTS and Matlab
>>>>>>>>>>>>>>>> R2015b...
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Mon, Aug 8, 2016 at 2:28 PM, Adam Isaacson <
>>>>>>>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Hi Heystek,
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> What OS are you using? I am using Ubuntu 4.04 LTS. What
>>>>>>>>>>>>>>>>> repo are you using? I am using
>>>>>>>>>>>>>>>>> https://github.com/ska-sa/mlib_devel. What version of
>>>>>>>>>>>>>>>>> Matlab and Xilinx are you using? I am using Matlab R2012b and 
>>>>>>>>>>>>>>>>> R2105b. I am
>>>>>>>>>>>>>>>>> using Xilinx ISE 14.7. I wrote these How To docs which may or 
>>>>>>>>>>>>>>>>> may not come
>>>>>>>>>>>>>>>>> in handy.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> 1) Matlab 2012b and 2015b Installation:
>>>>>>>>>>>>>>>>> https://drive.google.com/open?
>>>>>>>>>>>>>>>>> id=18BBkoWlSGeuK8BV1UlSnRJIYzlOEWUhqTlF_zAePTj0
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> 2) Xilinx ISE 14.7 Installation:
>>>>>>>>>>>>>>>>> https://drive.google.com/open?
>>>>>>>>>>>>>>>>> id=1o7Wl7wzB7VE1Cckk60B35WerJvl5crXa7Q5xbcoYgE0
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> This should be read in conjunction with the CASPER wiki
>>>>>>>>>>>>>>>>> page - https://casper.berkeley.edu/
>>>>>>>>>>>>>>>>> wiki/MSSGE_Setup_with_Xilinx_14.x_and_Matlab_2012b - did
>>>>>>>>>>>>>>>>> you follow "tweaks to be able to compile"?
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Kind Regards,
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Adam
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Mon, Aug 8, 2016 at 1:53 PM, Heystek Grobler <
>>>>>>>>>>>>>>>>> [email protected]> wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Good Day
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> My name is Heystek Grobler. I am an electrical en
>>>>>>>>>>>>>>>>>> electronic engineering science student and for my final year 
>>>>>>>>>>>>>>>>>> project
>>>>>>>>>>>>>>>>>> (skripsie) I'm developing a wideband spectrometer on a 
>>>>>>>>>>>>>>>>>> ROACH-2 board.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Currently I have a problem with Xilinx System Generator
>>>>>>>>>>>>>>>>>> and MATLAB. The Simulink Model runs as a simulation but as 
>>>>>>>>>>>>>>>>>> soon as I run it
>>>>>>>>>>>>>>>>>> in Xilinx System Generator to compile it for the board it 
>>>>>>>>>>>>>>>>>> crashes and gives
>>>>>>>>>>>>>>>>>> a "design error" as and "block error".
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> I was hoping that if possible, that you could provide me
>>>>>>>>>>>>>>>>>> with assistance to get Xilinx and Simulink up and running. 
>>>>>>>>>>>>>>>>>> So far I
>>>>>>>>>>>>>>>>>> followed the CASPER tutorials but got stuck with this 
>>>>>>>>>>>>>>>>>> problem/
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> I hope to hear from you soon.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Have a wonderful day
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Adam Isaacson
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> DBE: FPGA Engineer
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> SKA-SA
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> 3rd Floor
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> The Park
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Park Road
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Pinelands
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> 7405
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Tel: +27215067300 (W)
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Fax: +27215067375 (W)
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Cell: +27825639602
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Adam Isaacson
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> DBE: FPGA Engineer
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> SKA-SA
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> 3rd Floor
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> The Park
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Park Road
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Pinelands
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> 7405
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Tel: +27215067300 (W)
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Fax: +27215067375 (W)
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Cell: +27825639602
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Adam Isaacson
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> DBE: FPGA Engineer
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> SKA-SA
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> 3rd Floor
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> The Park
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Park Road
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Pinelands
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> 7405
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Tel: +27215067300 (W)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Fax: +27215067375 (W)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Cell: +27825639602
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>>
>>>>>>>>>>> Adam Isaacson
>>>>>>>>>>>
>>>>>>>>>>> DBE: FPGA Engineer
>>>>>>>>>>>
>>>>>>>>>>> SKA-SA
>>>>>>>>>>>
>>>>>>>>>>> 3rd Floor
>>>>>>>>>>>
>>>>>>>>>>> The Park
>>>>>>>>>>>
>>>>>>>>>>> Park Road
>>>>>>>>>>>
>>>>>>>>>>> Pinelands
>>>>>>>>>>>
>>>>>>>>>>> 7405
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Tel: +27215067300 (W)
>>>>>>>>>>>
>>>>>>>>>>> Fax: +27215067375 (W)
>>>>>>>>>>>
>>>>>>>>>>> Cell: +27825639602
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>>
>>>>>>>>> Adam Isaacson
>>>>>>>>>
>>>>>>>>> DBE: FPGA Engineer
>>>>>>>>>
>>>>>>>>> SKA-SA
>>>>>>>>>
>>>>>>>>> 3rd Floor
>>>>>>>>>
>>>>>>>>> The Park
>>>>>>>>>
>>>>>>>>> Park Road
>>>>>>>>>
>>>>>>>>> Pinelands
>>>>>>>>>
>>>>>>>>> 7405
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Tel: +27215067300 (W)
>>>>>>>>>
>>>>>>>>> Fax: +27215067375 (W)
>>>>>>>>>
>>>>>>>>> Cell: +27825639602
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>>
>>>>>> Adam Isaacson
>>>>>>
>>>>>> DBE: FPGA Engineer
>>>>>>
>>>>>> SKA-SA
>>>>>>
>>>>>> 3rd Floor
>>>>>>
>>>>>> The Park
>>>>>>
>>>>>> Park Road
>>>>>>
>>>>>> Pinelands
>>>>>>
>>>>>> 7405
>>>>>>
>>>>>>
>>>>>> Tel: +27215067300 (W)
>>>>>>
>>>>>> Fax: +27215067375 (W)
>>>>>>
>>>>>> Cell: +27825639602
>>>>>>
>>>>>
>>>>>
>>>>
>>>
>>
>

Reply via email to