In a lab, it's kinda hard to. Unless you had a decent amount of traffic flowing where things NEEDED to be fragmented and interleaved, you actually wouldn't see anything in there.
So short of having a traffic generator, it's difficult to see anything there. HTH, Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE #153, CISSP, et al. CCSI/JNCI-M/JNCI-J IPExpert VP - Curriculum Development IPExpert Sr. Technical Instructor [EMAIL PROTECTED] http://www.ipexpert.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bradley Lowry Sent: Thursday, December 28, 2006 10:43 AM To: [email protected] Subject: [OSL | CCIE_RS] Multi-link PPP with interleave question. I'm trying to get PP with interleave to work. How can I tell if it's working? If interleave is working shouldn't I get something like: Output queue: 0/1000/64/0 (size/max total/threshold/drops/INTERLEAVES) when I do a show on the interface? Below are what I think are the relevant lines of configuration and the output of the show command. Thanks, Bradley On R7: r7(config-if)#do show int s1 r7(config-if)#do show int s1 Serial1 is down, line protocol is down Hardware is HD64570 MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation PPP, LCP Closed, multilink Closed, loopback not set Keepalive set (10 sec) Last input never, output never, output hang never Last clearing of "show interface" counters 15:24:53 Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/0/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) Available Bandwidth 1158 kilobits/sec 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort 0 packets output, 0 bytes, 0 underruns 0 output errors, 0 collisions, 1848 interface resets 0 output buffer failures, 0 output buffers swapped out 0 carrier transitions DCD=down DSR=down DTR=down RTS=down CTS=down ------------------------------------------------------- R4 interface Multilink1 bandwidth 128 ip address 1.1.1.2 255.255.255.0 ppp multilink ppp multilink fragment delay 10 ppp multilink interleave ppp multilink group 1 interface Serial1 bandwidth 9600 no ip address encapsulation ppp fair-queue ppp multilink ppp multilink group 1 ----------------------------------------------------------------- R7 interface Multilink1 bandwidth 128 ip address 1.1.1.1 255.255.255.0 ppp multilink ppp multilink group 1 interface Serial1 no ip address encapsulation ppp ppp multilink ppp multilink group 1 --------------------------------------------------------------
