The router must be reloaded because the interface is part of the IDB still (Interface database), and there isn't a method to clear entries out of that prior to reloading when it is dynamically built.
HTH, Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE #153, CISSP, et al. CCSI/JNCI-M/JNCI-J IPexpert VP - Curriculum Development IPexpert Sr. Technical Instructor [EMAIL PROTECTED] http://www.ipexpert.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of arijan Sent: Saturday, January 06, 2007 4:59 AM To: [email protected] Subject: [OSL | CCIE_RS] frame-relay subinterface question When you do a subinterface on a frame, once you do e point-to-point you cant go back a do multipoint or viceversa, even if you do "default interface serial 0/0.1111 point- to-point" or type "no interface serial 0/0.1111 point- to-point". The solution is you have to reload the router after you erase the serial config so you can change the the point-to-point or multipoint which takes time, Anybody has any other solution to this problem without the IOS reload Thanks in advance Arijan
