Check out the buffers command? http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hnm_r/ nmg_01h.htm#wp1191799
Buffers are a memory-oriented thing and therefore globally configured. For this specific thing (Lab 22 by the way, not 23), the problem we'd have is noted in the configs: "description Initial Buffers may not be able to be set due to CSCea87766" That has been removed in the 9.0 release. Scott Morris, CCIE4 (R&S/ISP-Dial/Security/Service Provider) #4713, JNCIE #153, CISSP, et al. CCSI/JNCI-M/JNCI-J IPexpert VP - Curriculum Development IPexpert Sr. Technical Instructor [EMAIL PROTECTED] http://www.ipexpert.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gavin Lawson Sent: Saturday, January 06, 2007 6:41 AM To: [email protected] Subject: [OSL | CCIE_RS] Lab 23 - WAN - Frame Relay Buffers. How do we set the buffers on frame relay interfaces to match? -> The number of temporary buffers allocated at system reload is set to 100 -> The minimum number of free buffers is set to 50 GL
