Well the doc-cd says explicitly: Frame Relay Traffic Shaping and Multilink PPP over Frame Relay Before using Multilink PPP over Frame Relay, FRTS must be enabled. And that's it for the explanation! :)
Best Regards, Bojan Zivancevic Network Engineer From: Jay Taylor [mailto:[email protected]] Sent: Thursday, January 20, 2011 17:07 To: Michael Smith Cc: Bojan Zivancevic; [email protected] Subject: Re: [OSL | CCIE_RS] multink ppp over frame relay - is FRTS mandatory? That may be the case but I'd rather not risk the points. On Thu, Jan 20, 2011 at 11:05 AM, Michael Smith <[email protected]<mailto:[email protected]>> wrote: Hello, FRTS is not required for the multilink PPP interface. As long as you have the virtual-template correctly configured that error will pop up but it doesn't matter as the interface will be up/up anyway. Now don't ask me how I know this!!! > Date: Thu, 20 Jan 2011 08:05:39 -0500 > From: [email protected]<mailto:[email protected]> > To: [email protected]<mailto:[email protected]> > CC: [email protected]<mailto:[email protected]> > Subject: Re: [OSL | CCIE_RS] multink ppp over frame relay - is FRTS mandatory? > > MLPPPoFR is a royal pain to find... Good stuff to know though! QoS config > guide - http://grab.by/8u9e > > http://www.cisco.com/en/US/customer/docs/ios/qos/configuration/guide/mlppp_over_fr_ps6441_TSD_Products_Configuration_Guide_Chapter.html > > > On Thu, Jan 20, 2011 at 6:03 AM, Bojan Zivancevic > <[email protected]<mailto:[email protected]> > > wrote: > > > One more dilemma on my side... > > > > When I try to enable multilink ppp over FR (virtual-templates blablabla) I > > always get the message > > > > %FR-3-MLPOFR_ERROR: MLPoFR not configured properly on Link Virtual-Access1 > > Bundle Virtual-Access3 : > > Frame Relay traffic shaping must be enabled > > > > I know I have read somewhere that this message should be ignored and that > > in fact MLPPP works without it over FR. But now I can't find it. > > > > And I did not find a sure way to check if it is working or not. Can > > somebody confirm FRTS must be applied or not, and it would be great if > > someone could explain how to verify if MLPPP is really working (with or > > without FRTS.) > > > > Best Regards, > > > > Bojan Zivancevic > > Network Engineer > > _______________________________________________ > > For more information regarding industry leading CCIE Lab training, please > > visit www.ipexpert.com<http://www.ipexpert.com> > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com<http://www.ipexpert.com> _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
