Did you configure loopback after the ospf processes up and running with router-id serial interface?
Aris Sent from my HTC ----- Reply message ----- From: "Fulvio allegretti" <[email protected]> To: <[email protected]> Subject: [OSL | CCIE_RS] OSPF router ID Date: Sat, Jun 16, 2012 6:31 AM Can anyone explain why I am not seeing the loopback as my ospf router-id? I know I can set it manually, just trying to understand what is going on. I have cleared the ip ospf proc more than once. Any ideas? R5#sh ip protocols Routing Protocol is "ospf 9" Outgoing update filter list for all interfaces is not set Incoming update filter list for all interfaces is not set Router ID 100.5.6.5 It is an area border router Number of areas in this router is 2. 2 normal 0 stub 0 nssa Maximum path: 4 Routing for Networks: Routing on Interfaces Configured Explicitly (Area 0): Loopback0 Serial0/0/0.2 GigabitEthernet0/0.15 Routing on Interfaces Configured Explicitly (Area 56): Serial0/0/0.1 Reference bandwidth unit is 100 mbps Routing Information Sources: Gateway Distance Last Update 100.5.6.6 110 00:39:28 100.100.100.6 110 00:02:38 100.100.100.1 110 00:02:38 100.100.100.2 110 00:02:38 Distance: (default is 110) R5#show ip int bri | ex un Interface IP-Address OK? Method Status Protocol GigabitEthernet0/0.15 100.1.5.5 YES manual up up Serial0/0/0.1 100.2.5.5 YES manual up up Serial0/0/0.2 100.5.6.5 YES manual up up Loopback0 100.100.100.5 YES manual up up running: c3845-adventerprisek9-mz.124-24.T5.bin Thanks, Fulvio _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
