Try removing the ospf process and then reapplying it. You may not have had the 
loop back active when ospf initialized. 

Regards,
Raliegh Anthony Jones

Sent from my iPhone

On Jun 15, 2012, at 5:31 PM, Fulvio allegretti <[email protected]> wrote:

> 
> Can anyone explain why I am not seeing the loopback as my ospf router-id? I 
> know I can set it manually, just trying to understand what is going on. I 
> have cleared the ip ospf proc more than once. Any ideas?
> 
> R5#sh ip protocols
> Routing Protocol is "ospf 9"
>  Outgoing update filter list for all interfaces is not set
>  Incoming update filter list for all interfaces is not set
>  Router ID 100.5.6.5
>  It is an area border router
>  Number of areas in this router is 2. 2 normal 0 stub 0 nssa
>  Maximum path: 4
>  Routing for Networks:
>  Routing on Interfaces Configured Explicitly (Area 0):
>    Loopback0
>    Serial0/0/0.2
>    GigabitEthernet0/0.15
>  Routing on Interfaces Configured Explicitly (Area 56):
>    Serial0/0/0.1
> Reference bandwidth unit is 100 mbps
>  Routing Information Sources:
>    Gateway         Distance      Last Update
>    100.5.6.6            110      00:39:28
>    100.100.100.6        110      00:02:38
>    100.100.100.1        110      00:02:38
>    100.100.100.2        110      00:02:38
>  Distance: (default is 110)
> 
> 
> R5#show ip int bri | ex un
> Interface                  IP-Address      OK? Method Status                
> Protocol
> GigabitEthernet0/0.15      100.1.5.5       YES manual up                    up
> Serial0/0/0.1              100.2.5.5       YES manual up                    up
> Serial0/0/0.2              100.5.6.5       YES manual up                    up
> Loopback0                  100.100.100.5   YES manual up                    up
> 
> running: c3845-adventerprisek9-mz.124-24.T5.bin
> 
> Thanks, Fulvio
>                         
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
> 
> Are you a CCNP or CCIE and looking for a job? Check out 
> www.PlatinumPlacement.com
> 
> http://onlinestudylist.com/mailman/listinfo/ccie_rs
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

http://onlinestudylist.com/mailman/listinfo/ccie_rs

Reply via email to