It is just showing the topology. It will show all that's there. Only the first one will be in the route table.
On Friday, August 10, 2012, Keller Giacomarro <[email protected]> wrote: > Okay, pretty stumped here. > > R3#show ip eigrp topology 150.1.7.0 255.255.255.0 > IP-EIGRP (AS 100): Topology entry for 150.1.7.0/24 > State is Passive, Query origin flag is 1, 1 Successor(s), FD is 128256 > Routing Descriptor Blocks: > 155.1.37.7 (FastEthernet0/0), from 155.1.37.7, Send flag is 0x0 > Composite metric is (128256/128000), Route is Internal > Vector metric: > Minimum bandwidth is 100000 Kbit > Total delay is 5010 microseconds > Reliability is 255/255 > Load is 1/255 > Minimum MTU is 1500 > Hop count is 1 > 155.1.0.5 (Serial1/0.1), from 155.1.0.5, Send flag is 0x0 > Composite metric is (1152512/640512), Route is Internal > Vector metric: > Minimum bandwidth is 128 Kbit > Total delay is 45020 microseconds > Reliability is 255/255 > Load is 1/255 > > I thought that 'show ip eigrp topo x.x.x.x/x' showed successors and > feasible successors only. But the second entry above shows an AD of > 640512, which is larger than the FD of 128256. Is this considered a > Feasible Successor or not? If not, what's it doing in this command > output? > > Thanks as always! > > Keller Giacomarro > [email protected] > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > -- Samir Idris _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
