Usually if you have your routes but no forwarding, it's an MPLS issue, not MP-BGP.
Check 'sh MPLS forwarding' and 'sh MPLS ldp ne', etc. Verify the LSP. Bob -- Sent from my iPhone, please excuse any typos. On Feb 1, 2013, at 6:20 PM, "Bodnar, Edward" <[email protected]> wrote: > I can never seem to get this to work. I can See routes end to end but I am > missing something when I use BGP as the PE - CE protocol. I thought BGP was > supposed to be the easy one J > > > > > > I have full connectivity. And I can see routes Just can't ping. > > > > RT4: > > router bgp 1 > > no bgp default ipv4-unicast > > bgp log-neighbor-changes > > neighbor 1.1.1.1 remote-as 1 > > neighbor 1.1.1.1 update-source Loopback0 > > neighbor 10.10.45.5 remote-as 5 > > ! > > address-family ipv4 > > neighbor 1.1.1.1 activate > > neighbor 10.10.45.5 activate > > no auto-summary > > no synchronization > > exit-address-family > > ! > > address-family vpnv4 > > neighbor 1.1.1.1 activate > > neighbor 1.1.1.1 send-community both > > exit-address-family > > ! > > address-family ipv4 vrf B > > neighbor 10.10.45.5 remote-as 5 > > neighbor 10.10.45.5 activate > > no synchronization > > exit-address-family > > > > > > > > > > > > R5(config-router)#do sh run | s bgp > > router bgp 5 > > no synchronization > > bgp log-neighbor-changes > > network 55.55.55.55 mask 255.255.255.255 > > neighbor 10.10.45.4 remote-as 1 > > no auto-summary > > > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
