Same AS at the two cust sites?
 Routes on CE or not?

J

Sent from my iPhone

On Feb 1, 2013, at 6:51 PM, "Bodnar, Edward" <[email protected]> wrote:

> If I change things up and use EIGRP RIP or OSPF it works just fine.   So I 
> was thinking it was something with BGP.
> 
> 
> 
> From: Steve Di Bias [mailto:[email protected]]
> Sent: Friday, February 01, 2013 6:48 PM
> To: Bodnar, Edward
> Cc: [email protected]
> Subject: Re: [OSL | CCIE_RS] BGP PE - CE configuration
> 
> 
> 
> Make sure you are advertising the loopbacks on your CE's, do you see these in 
> the routing table of the other CE's? Now try pinging again but source your 
> packets from the loopback.
> 
> 
> 
> From CE -"ping x.x.x.x source y.y.y.y"
> 
> 
> 
> If you are seeing the routes on your CE's that means the RT's are importing 
> just fine. If that doesn't work we will dig deeper.
> 
> 
> 
> 
> 
> 
> 
> On Fri, Feb 1, 2013 at 2:24 PM, Bodnar, Edward 
> <[email protected]<mailto:[email protected]>> wrote:
> 
> I can never seem to get this to work.  I can See routes end to end but I am 
> missing something when I use BGP as the PE - CE protocol.  I thought BGP was 
> supposed to be the easy one J
> 
> 
> 
> 
> 
> I have full connectivity.  And I can see routes Just can't ping.
> 
> 
> 
> RT4:
> 
> router bgp 1
> 
> no bgp default ipv4-unicast
> 
> bgp log-neighbor-changes
> 
> neighbor 1.1.1.1 remote-as 1
> 
> neighbor 1.1.1.1 update-source Loopback0
> 
> neighbor 10.10.45.5 remote-as 5
> 
> !
> 
> address-family ipv4
> 
>  neighbor 1.1.1.1 activate
> 
>  neighbor 10.10.45.5 activate
> 
>  no auto-summary
> 
>  no synchronization
> 
> exit-address-family
> 
> !
> 
> address-family vpnv4
> 
>  neighbor 1.1.1.1 activate
> 
>  neighbor 1.1.1.1 send-community both
> 
> exit-address-family
> 
> !
> 
> address-family ipv4 vrf B
> 
>  neighbor 10.10.45.5 remote-as 5
> 
>  neighbor 10.10.45.5 activate
> 
>  no synchronization
> 
>  exit-address-family
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> R5(config-router)#do sh run | s bgp
> 
> router bgp 5
> 
> no synchronization
> 
> bgp log-neighbor-changes
> 
> network 55.55.55.55 mask 255.255.255.255
> 
> neighbor 10.10.45.4 remote-as 1
> 
> no auto-summary
> 
> 
> 
> 
> 
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com<http://www.ipexpert.com>
> 
> Are you a CCNP or CCIE and looking for a job? Check out 
> www.PlatinumPlacement.com<http://www.PlatinumPlacement.com>
> 
> http://onlinestudylist.com/mailman/listinfo/ccie_rs
> 
> 
> 
> 
> 
> 
> 
> --
> 
> Thank you,
> 
> 
> 
> Steve Di Bias
> 
> CCIE #32840
> 
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
> 
> Are you a CCNP or CCIE and looking for a job? Check out 
> www.PlatinumPlacement.com
> 
> http://onlinestudylist.com/mailman/listinfo/ccie_rs
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

http://onlinestudylist.com/mailman/listinfo/ccie_rs

Reply via email to