Do you still have the ability to test? I would be more than happy to lab this up what lab were you doing?
On Fri, Feb 1, 2013 at 3:51 PM, Bodnar, Edward <[email protected]>wrote: > If I change things up and use EIGRP RIP or OSPF it works just fine. So > I was thinking it was something with BGP. **** > > ** ** > > *From:* Steve Di Bias [mailto:[email protected]] > *Sent:* Friday, February 01, 2013 6:48 PM > *To:* Bodnar, Edward > *Cc:* [email protected] > *Subject:* Re: [OSL | CCIE_RS] BGP PE - CE configuration**** > > ** ** > > Make sure you are advertising the loopbacks on your CE's, do you see these > in the routing table of the other CE's? Now try pinging again but source > your packets from the loopback. **** > > ** ** > > From CE -"ping x.x.x.x source y.y.y.y"**** > > ** ** > > If you are seeing the routes on your CE's that means the RT's are > importing just fine. If that doesn't work we will dig deeper.**** > > ** ** > > ** ** > > ** ** > > On Fri, Feb 1, 2013 at 2:24 PM, Bodnar, Edward <[email protected]> > wrote:**** > > I can never seem to get this to work. I can See routes end to end but I > am missing something when I use BGP as the PE - CE protocol. I thought BGP > was supposed to be the easy one J > > > > > > I have full connectivity. And I can see routes Just can't ping. > > > > RT4: > > router bgp 1 > > no bgp default ipv4-unicast > > bgp log-neighbor-changes > > neighbor 1.1.1.1 remote-as 1 > > neighbor 1.1.1.1 update-source Loopback0 > > neighbor 10.10.45.5 remote-as 5 > > ! > > address-family ipv4 > > neighbor 1.1.1.1 activate > > neighbor 10.10.45.5 activate > > no auto-summary > > no synchronization > > exit-address-family > > ! > > address-family vpnv4 > > neighbor 1.1.1.1 activate > > neighbor 1.1.1.1 send-community both > > exit-address-family > > ! > > address-family ipv4 vrf B > > neighbor 10.10.45.5 remote-as 5 > > neighbor 10.10.45.5 activate > > no synchronization > > exit-address-family > > > > > > > > > > > > R5(config-router)#do sh run | s bgp > > router bgp 5 > > no synchronization > > bgp log-neighbor-changes > > network 55.55.55.55 mask 255.255.255.255 > > neighbor 10.10.45.4 remote-as 1 > > no auto-summary > > > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs**** > > > > **** > > ** ** > > -- **** > > Thank you,**** > > ** ** > > Steve Di Bias**** > > CCIE #32840**** > -- Thank you, Steve Di Bias CCIE #32840 _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
