Transport label will be popped at RT3 due to PHP .. when the data packet hits RT4, the vpn label should still be there. Can you see that?
Also, when you ping from R5, are you sourcing the packet from 55.55.55.55? On Sat, Feb 2, 2013 at 11:26 AM, Bodnar, Edward <[email protected]>wrote: > I am popping my tag on RT3 before it hits RT4. I am not sure if this is > what should be happening or not. > > LDP is end to end and works fine. > > -----Original Message----- > From: Tony Singh [mailto:[email protected]] > Sent: Friday, February 01, 2013 7:23 PM > To: Tony Singh > Cc: Bodnar, Edward; [email protected] > Subject: Re: [OSL | CCIE_RS] BGP PE - CE configuration > > Take that back, was thinking a use case at work where we have vrf > definitions to separate routing tables on the CE as we face PE > > Debug ip icmp > > ping vrf B 55.55.55.55 > > From r4 > > What happens > > As bob said check mpls ldp nei, also check not acl copp distribute or > filter list is in the way.. > > -- > BR > > Tony > > Sent from my iPad > > On 2 Feb 2013, at 00:01, Tony Singh <[email protected]> wrote: > > > Can't see vrf definition on R5 presumably your CE? > > > > -- > > BR > > > > Tony > > > > Sent from my iPad > > > > On 1 Feb 2013, at 22:24, "Bodnar, Edward" <[email protected]> > wrote: > > > >> I can never seem to get this to work. I can See routes end to end but > I am missing something when I use BGP as the PE - CE protocol. I thought > BGP was supposed to be the easy one J > >> > >> > >> > >> > >> > >> I have full connectivity. And I can see routes Just can't ping. > >> > >> > >> > >> RT4: > >> > >> router bgp 1 > >> > >> no bgp default ipv4-unicast > >> > >> bgp log-neighbor-changes > >> > >> neighbor 1.1.1.1 remote-as 1 > >> > >> neighbor 1.1.1.1 update-source Loopback0 > >> > >> neighbor 10.10.45.5 remote-as 5 > >> > >> ! > >> > >> address-family ipv4 > >> > >> neighbor 1.1.1.1 activate > >> > >> neighbor 10.10.45.5 activate > >> > >> no auto-summary > >> > >> no synchronization > >> > >> exit-address-family > >> > >> ! > >> > >> address-family vpnv4 > >> > >> neighbor 1.1.1.1 activate > >> > >> neighbor 1.1.1.1 send-community both > >> > >> exit-address-family > >> > >> ! > >> > >> address-family ipv4 vrf B > >> > >> neighbor 10.10.45.5 remote-as 5 > >> > >> neighbor 10.10.45.5 activate > >> > >> no synchronization > >> > >> exit-address-family > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> R5(config-router)#do sh run | s bgp > >> > >> router bgp 5 > >> > >> no synchronization > >> > >> bgp log-neighbor-changes > >> > >> network 55.55.55.55 mask 255.255.255.255 > >> > >> neighbor 10.10.45.4 remote-as 1 > >> > >> no auto-summary > >> > >> > >> > >> > >> > >> _______________________________________________ > >> For more information regarding industry leading CCIE Lab training, > please visit www.ipexpert.com > >> > >> Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com <http://www.platinumplacement.com/> > >> > >> http://onlinestudylist.com/mailman/listinfo/ccie_rs > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com <http://www.platinumplacement.com/> > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > -- Samir Idris _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
