Mark,
Are you clearing configs before loading initial on the proctor
labs site? I've had that happen if I jump into my session, and load configs
before clearing/reloading the devices. It adds roughly 5-10 minutes in the
beginning, but doing that I've never since had that type of issue.
Problem (sounds like this at least) is that the configs are not
cleared from those devices between rentals. So the last guy might have been
running Lab 4 from the WB, and when you got the rack the next or so, you
loaded the initial configs and they were just merged.
--
Jonathan Major
Network Engineer
[email protected] <[email protected]>
=======================
CCNP;MCITP;MCSA
> Date: Mon, 12 Aug 2013 22:10:43 +0000
> From: Mark Turpin <[email protected]>
> To: "[email protected]" <[email protected]>
> Subject: [OSL | CCIE_RS] continued lab issues
> Message-ID:
> <
> ef11a5e8d4314e1bbf508ea587ee9...@by2pr07mb092.namprd07.prod.outlook.com>
>
> Content-Type: text/plain; charset="us-ascii"
>
> OK, so I've hit enough of these that I have to say something. This is
> just the latest example.
>
> I continue to hit errors in the text during the practice labs and then
> waste time troubleshooting something that's plain wrong.
>
> Is it just me? Is anyone else having these problems?
>
> For example, Vol 3, Lab 8, Ticket 7
> BB1's supposed to have this for BGP:
> !
> router bgp 100
> no synchronization
> bgp log-neighbor-changes
> redistribute connected route-map C2B
> neighbor 23.144.12.2 remote-as 65457
> neighbor 23.144.12.2 ebgp-multihop 255
> no auto-summary
> !
>
>
> But instead on Pod102 I get this.
> BB1's configuration:
> router bgp 218
> bgp router-id 193.44.0.21
> bgp log-neighbor-changes
> neighbor 193.44.0.8 remote-as 218
> neighbor 193.44.0.8 update-source Loopback0
> neighbor 193.44.211.1 remote-as 17
> neighbor 193.44.211.1 password ipexpert
> !
> address-family ipv4
> redistribute connected route-map Inject
> neighbor 193.44.0.8 activate
> neighbor 193.44.0.8 send-community
> neighbor 193.44.211.1 activate
> neighbor 193.44.211.1 send-community
> no auto-summary
> no synchronization
> exit-address-family
> !
> address-family ipv4 multicast
> redistribute connected
> neighbor 193.44.0.8 activate
> neighbor 193.44.0.8 send-community
> neighbor 193.44.211.1 activate
> neighbor 193.44.211.1 send-community
> no auto-summary
> no synchronization
> exit-address-family
> !
>
> It is incredibly frustrating to drop thousands of dollars of my own money
> with my lab this Friday, only to be tripped up by proctor labs/ipexpert
> errors.
>
> C'mon guys.
>
>
> End of CCIE_RS Digest, Vol 91, Issue 9
> **************************************
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
