its been a long time since i use racks . but the first thing i did was to have physical , logical topology opened in pdf's. initial configs ready . When my session came i just . write erase ..reload .. move to next router do the same .....
i am not sure about back bone devices ...if we can change their configs ..then we can do same thing write erase ...Copy & paste .. On Tue, Aug 13, 2013 at 8:09 PM, Jonathan Major <[email protected]> wrote: > Mark, > > > Are you clearing configs before loading initial on the proctor > labs site? I've had that happen if I jump into my session, and load configs > before clearing/reloading the devices. It adds roughly 5-10 minutes in the > beginning, but doing that I've never since had that type of issue. > > > Problem (sounds like this at least) is that the configs are not > cleared from those devices between rentals. So the last guy might have been > running Lab 4 from the WB, and when you got the rack the next or so, you > loaded the initial configs and they were just merged. > > > > -- > Jonathan Major > Network Engineer > [email protected] <[email protected]> > ======================= > CCNP;MCITP;MCSA > > > > > Date: Mon, 12 Aug 2013 22:10:43 +0000 > > From: Mark Turpin <[email protected]> > > To: "[email protected]" <[email protected]> > > Subject: [OSL | CCIE_RS] continued lab issues > > Message-ID: > > < > > ef11a5e8d4314e1bbf508ea587ee9...@by2pr07mb092.namprd07.prod.outlook.com> > > > > Content-Type: text/plain; charset="us-ascii" > > > > OK, so I've hit enough of these that I have to say something. This is > > just the latest example. > > > > I continue to hit errors in the text during the practice labs and then > > waste time troubleshooting something that's plain wrong. > > > > Is it just me? Is anyone else having these problems? > > > > For example, Vol 3, Lab 8, Ticket 7 > > BB1's supposed to have this for BGP: > > ! > > router bgp 100 > > no synchronization > > bgp log-neighbor-changes > > redistribute connected route-map C2B > > neighbor 23.144.12.2 remote-as 65457 > > neighbor 23.144.12.2 ebgp-multihop 255 > > no auto-summary > > ! > > > > > > But instead on Pod102 I get this. > > BB1's configuration: > > router bgp 218 > > bgp router-id 193.44.0.21 > > bgp log-neighbor-changes > > neighbor 193.44.0.8 remote-as 218 > > neighbor 193.44.0.8 update-source Loopback0 > > neighbor 193.44.211.1 remote-as 17 > > neighbor 193.44.211.1 password ipexpert > > ! > > address-family ipv4 > > redistribute connected route-map Inject > > neighbor 193.44.0.8 activate > > neighbor 193.44.0.8 send-community > > neighbor 193.44.211.1 activate > > neighbor 193.44.211.1 send-community > > no auto-summary > > no synchronization > > exit-address-family > > ! > > address-family ipv4 multicast > > redistribute connected > > neighbor 193.44.0.8 activate > > neighbor 193.44.0.8 send-community > > neighbor 193.44.211.1 activate > > neighbor 193.44.211.1 send-community > > no auto-summary > > no synchronization > > exit-address-family > > ! > > > > It is incredibly frustrating to drop thousands of dollars of my own money > > with my lab this Friday, only to be tripped up by proctor labs/ipexpert > > errors. > > > > C'mon guys. > > > > > > End of CCIE_RS Digest, Vol 91, Issue 9 > > ************************************** > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
