Just to add a bit more to Michael's email If you are running H323 gateway you need "ccm-manager music-on-hold"
-----Original Message----- From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Michael Ciarfello Sent: Tuesday, 16 June 2009 2:29 PM To: Azeem ahamed Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Integrating Cisco CallManager and Cisco SRST to Use Cisco SRST As a Multicast MOH Resource Did the original poster get this working? I did verify multicast routing is not needed on any router. (Thanks Cristi). Also no PIM is needed. I DID have to reboot the router becasue the multicast packets kept coming from the loopback interface on my last configuration even though SRST source-address was voice VLAN interface. Seemed to need the route command in my last configuration. IP of loopback AND IP of voice VLAN. I think MGCP was bound to loopback and SRST was bound to voice vlan. I'll re-try Christ's route meaning, but think if I didn't also have loopback music stopped. Never configured the route command for a customer. Still working on perfecting the configuration and meanings of everything. I can get it to work, but that's not expert enough for me. ________________________________________ From: Azeem ahamed [azeemo...@gmail.com] Sent: Thursday, June 11, 2009 4:10 AM To: Michael Ciarfello Cc: Cristobal Priego; ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Integrating Cisco CallManager and Cisco SRST to Use Cisco SRST As a Multicast MOH Resource Also do try putting in the ip pim sparse mode when you enable the Multicasting On Thu, Jun 11, 2009 at 7:30 AM, Michael Ciarfello<mciarfe...@iplogic.com> wrote: > Hi and welcome. > > Did you upload the MOH file to all the other servers in the cluster? > Multicast routing enabled on the remote gateway? > You have 239.1.1.1 which implies FIRST music source, G.711. Are you using > G.711 over the WAN? > What does show ccm-manager music-on-hold output when the phone is on hold? > What does show ip mroute display when on hold? > > There is a Cisco made document describing this feature. Probably search for > Moh from router flash on the Cisco web site. > > The remote phone config file should have in it 239.1.1.1 for Moh. You can > get the phone.xml file from the TFTP directory if the appropriate TFTP > service parameters are set or since you are a production system I wouldn't > mess with them and would sniff the phone bootup packets to read that file > from the sniffer. The phone might be listening to another IP Address for > some reason. > > Multicast MOH from remote site flash is like the phone turning a radio > channel. If it doesn't tune to the proper channel (defined in the config > file downloaded to the phone) you don't hear the radio program. > > ________________________________ > From: ccie_voice-boun...@onlinestudylist.com > [ccie_voice-boun...@onlinestudylist.com] On Behalf Of Cristobal Priego > [cristobalpri...@gmail.com] > Sent: Wednesday, June 10, 2009 4:54 PM > To: ccie_voice@onlinestudylist.com > Subject: [OSL | CCIE_Voice] Integrating Cisco CallManager and Cisco SRST to > Use Cisco SRST As a Multicast MOH Resource > > Hello Experts, > > This is not related to a lab or a pod, sometimes i use my customer's > networks to study > > I have centralized deployment, the cluster has 2 servers running CCM 7.x, > the MOH Servers are enabled for multicast, the ip address and port are > configured, the multicast increment is set to "Ip address" > On the selected audio source field on the option 1 (which is the MOH file > that we want to use) the hop count is set to 1 > The MOH audio source has the box check for Allow multicasting. > I created an MRG that include both serves and is enabled for Multicast, the > MRGL has the Moh MRG. the MRGL is assigned to the phones and the remote > gateway. the phones have the user/network audio source selected to option 1 > the remote gateway has the wav file loaded in flash. > the call-manager-fallback has the > ccm-manager music-on-hold > moh <audiofile.wav> > multicast moh 239.1.1.1 port 16384 route <ip address of the sub interface > dedicated for voice> > > If I put a call on hold on the remote branch, the phone is not playing the > music from the local gateway. i get beeps > either internal or external calls. what am i missing? > > If i place a call internally i get the beeps, however in RTMT i can see that > a multicast request becomes active > > If i issue a show ccm-manager music-on-hold i don't see anything > > your help is greatly appreciated > > CONFIDENTIALITY - The information contained in this electronic mail message is confidential and is intended solely for the addressee(s). If you are not an authorised recipient of this message please contact UXC Getronics Australia immediately by reply email and destroy/delete this message from your computer. Any unauthorised form of reproduction of this message, or part thereof, is strictly prohibited. DISCLAIMER - Unless specifically indicated otherwise, the views and opinions expressed in this email are those of the sender and not UXC Getronics Australia. While we endeavour to protect our network from computer viruses, UXC Getronics Australia does not warrant that this email or any attachments are free of viruses or any other defects or errors. It is the duty of the recipient to virus scan and otherwise test any information contained in this email before loading onto any computer system.
