Yes.  The interface was up.  This is the weird part.

I've encountered this issue in the past with Proctor Labs. Usually reloading the router will fix the problem. Not today.

I actually have a family issue that requires me to cancel my rack session early. I won't be able to verify further today. I will repeat the same lab this Sunday and follow-up.

*Matthew Berry*

/A+, CCENT, CCNA, CCNA Voice, CCVP, CCIE Voice Written/

*_Vitals:_*

*GVoice: *+1.612.424.5044

*Gmail*: ciscovoiceg...@gmail.com

*Skype*: ciscovoiceguru

*Twitter*: ciscovoiceguru

*_Cert Stats:_*

Cisco Cert Journey Began: Jan 1, 2009

1st Lab Attempt: Aug 16, 2010


On 6/3/2010 4:29 PM, Mike Brooks wrote:
Hey Matt,
Is interface fastethernet 1/1 up ? I believe the VLAN interfaces 130 and 240 will show down if the vlans are not configured on an interface that is up.
Mike

On Thu, Jun 3, 2010 at 5:05 PM, Matthew Berry <ciscovoiceg...@gmail.com <mailto:ciscovoiceg...@gmail.com>> wrote:

    I see this issue from time to time.  The VLAN interfaces on my
    BR1-RTR show a state of up, but line protocol is down.

    I made sure that there are ports with the vlans configured.  I
    reload the router.  I also made sure the vlans were in existence.

At this point, my BR1-RTR is useless until I get this working. Any ideas?

    interface Vlan130
     ip address 10.10.101.1 255.255.255.0
    !
    interface Vlan240
     ip address 10.10.201.1 255.255.255.0

    ...

    interface FastEthernet1/1
     switchport trunk native vlan 130
     switchport mode trunk
     switchport voice vlan 240

    ====

    BR1-RTR#show vlan-switch br

    VLAN Name                             Status    Ports
    ---- -------------------------------- ---------
    -------------------------------
    ...
    130  DATA                             active    Fa1/1, Fa1/15
    240  PHONES                           active    Fa1/1, Fa1/2,
    Fa1/3, Fa1/4
                                                    Fa1/5, Fa1/6,
    Fa1/7, Fa1/8
                                                    Fa1/9, Fa1/10,
    Fa1/11, Fa1/12
                                                    Fa1/13, Fa1/14, Fa1/15

    ====

    BR1-RTR#show ip int bri
    Interface                  IP-Address      OK? Method
    Status                Protocol
    ...
    Vlan130                    10.10.101.1     YES manual
    up                    down
Vlan240 10.10.201.1 YES NVRAM up down

--
    *Matthew Berry*

    /A+, CCENT, CCNA, CCNA Voice, CCVP, CCIE Voice Written/

    *_Vitals:_*

    *GVoice: *+1.612.424.5044

    *Gmail*: ciscovoiceg...@gmail.com <mailto:ciscovoiceg...@gmail.com>

    *Skype*: ciscovoiceguru

    *Twitter*: ciscovoiceguru

    *_Cert Stats:_*

    Cisco Cert Journey Began: Jan 1, 2009

    1st Lab Attempt: Aug 16, 2010


    _______________________________________________
    For more information regarding industry leading CCIE Lab training,
    please visit www.ipexpert.com <http://www.ipexpert.com/>


_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to