Matthew, Did you do a ³sh cdp neighber² and verify what port the phone was plugged into? I did notice below that you are showing the configuration for int fa1/1 and the Proctor Lab Racks usually have the phone at BR1 plugged into interface fa1/0 which is also not shown in your output as being set up. If the phone was plugged into interface fa1/0 and was not configured properly or shut, you would have this behavior.
If the vlan.dat file was not present in flash and the VLAN¹s were configured as you have shown below, then they would not show up when you do a ³sh vlan-s bri², but they would show up in a ³sh ip int bri². See ScreenShots: BR1-RTR#sh vlan-s bri (with vlan.dat deleted from flash) VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active Fa1/1, Fa1/2, Fa1/3, Fa1/4, Fa1/5 Fa1/6, Fa1/7, Fa1/8, Fa1/9, Fa1/10 Fa1/11, Fa1/12, Fa1/13, Fa1/14, Fa1/15 1002 fddi-default act/unsup 1003 token-ring-default act/unsup 1004 fddinet-default act/unsup 1005 trnet-default act/unsup ! ! BR1-RTR#sh ip int bri Interface IP-Address OK? Method Status Protocol ... Vlan130 10.10.101.1 YES NVRAM up down Vlan240 10.10.201.1 YES NVRAM up down I will be around on Sunday. If you are able to recreate this then, contact me and I can hop into your session and look around. Thank you, Amy --- Amy Ryan CCIE #24677 (Voice) Technical Instructor - IPexpert, Inc. Mailto: ar...@ipexpert.com Telephone: +1.810.326.1444 Live Assistance, Please visit: www.ipexpert.com/chat <http://www.ipexpert.com/chat> eFax: +1.810.454.0130 IPexpert is a premier provider of Self-Study Workbooks, Video on Demand, Audio Tools, Online Hardware Rental and Classroom Training for the Cisco CCIE (R&S, Voice, Security & Service Provider) certification(s) with training locations throughout the United States, Europe, South Asia and Australia. Be sure to visit our online communities at www.ipexpert.com/communities <http://www.ipexpert.com/communities> and our public website at www.ipexpert.com <http://www.ipexpert.com/> From: Angel Perez <gorr...@hotmail.com> Date: Fri, 4 Jun 2010 08:03:41 +0000 To: <amccar...@cciequest.com>, <ciscovoiceg...@gmail.com> Cc: osl osl <ccie_voice@onlinestudylist.com> Subject: Re: [OSL | CCIE_Voice] VLAN interfaces down Hi: If the vlan.dat file is deleted you will get this result Make sure that the vlan exists and also that it is active: vlan 130 create name data status active vlan 240 create name voice status active hth > Date: Thu, 3 Jun 2010 19:08:22 -0400 > From: amccar...@cciequest.com > To: ciscovoiceg...@gmail.com > CC: ccie_voice@onlinestudylist.com > Subject: Re: [OSL | CCIE_Voice] VLAN interfaces down > > Hey Bro, > I ran into an issue similar to that before but mine was because there > was no phone connected to the port. > > Antonio > > Quoting Matthew Berry <ciscovoiceg...@gmail.com>: > > > I see this issue from time to time. The VLAN interfaces on my BR1-RTR > > show a state of up, but line protocol is down. > > > > I made sure that there are ports with the vlans configured. I reload > > the router. I also made sure the vlans were in existence. > > > > At this point, my BR1-RTR is useless until I get this working. Any ideas? > > > > interface Vlan130 > > ip address 10.10.101.1 255.255.255.0 > > ! > > interface Vlan240 > > ip address 10.10.201.1 255.255.255.0 > > > > ... > > > > interface FastEthernet1/1 > > switchport trunk native vlan 130 > > switchport mode trunk > > switchport voice vlan 240 > > > > ==== > > > > BR1-RTR#show vlan-switch br > > > > VLAN Name Status Ports > > ---- -------------------------------- --------- > > ------------------------------- > > ... > > 130 DATA active Fa1/1, Fa1/15 > > 240 PHONES active Fa1/1, Fa1/2, Fa1/3, Fa1/4 > > Fa1/5, Fa1/6, Fa1/7, Fa1/8 > > Fa1/9, Fa1/10, Fa1/11, Fa1/12 > > Fa1/13, Fa1/14, Fa1/15 > > > > ==== > > > > BR1-RTR#show ip int bri > > Interface IP-Address OK? Method Status > > Protocol > > ... > > Vlan130 10.10.101.1 YES manual up > > down > > Vlan240 10.10.201.1 YES NVRAM up > > down > > > > -- > > > > *Matthew Berry* > > > > /A+, CCENT, CCNA, CCNA Voice, CCVP, CCIE Voice Written/ > > > > *_Vitals:_* > > > > *GVoice: *+1.612.424.5044 > > > > *Gmail*: ciscovoiceg...@gmail.com > > > > *Skype*: ciscovoiceguru > > > > *Twitter*: ciscovoiceguru > > > > *_Cert Stats:_* > > > > Cisco Cert Journey Began: Jan 1, 2009 > > > > 1st Lab Attempt: Aug 16, 2010 > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Hotmail: Powerful Free email with security by Microsoft. Get it now. <https://signup.live.com/signup.aspx?id=60969> _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com