But giving it a second thought... If you have "mls qos trust device cisco-phone" on the same port there is a chance it could work as you expect. But I'd believe it, if I saw this in cisco docs :)
On Wed, Jan 26, 2011 at 21:31, Miron Kobelski <findko...@gmail.com> wrote: > With your configuration you would trust ANY dscp marking received from the > IP phone port. No matter if it was sent by cisco ip phone or a rogue PC > behind it. > You loose the benefit of conditional trust boundary... I suspect that these > tasks are contradictory. > > regards > kobel > > > > On Wed, Jan 26, 2011 at 21:28, Friderich Claude <cfrider...@netcore.lu>wrote: > >> Hello Miron, >> >> >> >> I agree with you and the same remark in the attached file p.4 >> >> You can use either one of these three methods. You cannot use more than >> one method in a port. For example, >> >> you have configured the mls qos trust cos command on a port. When you >> configure the port with the >> >> service−policy input <policy−map−name> command, it removes the mls qos >> trust cos command >> >> automatically. >> >> >> >> I think we have to put the service-policy input <policy-map> with the >> following class-map in this policy-map >> >> >> >> policy-map myname >> >> class myname >> >> trust dscp >> >> >> >> and create the class before with a match ip dscp ef >> >> >> >> My opinion …. But remarks appreciated J >> >> >> >> Regards >> >> Claude >> >> >> >> *Claude Friderich* >> >> *PreSales Support* >> >> *[image: ccvp_voice_sm]*** >> >> *NETCORE PSF S.A.*** >> >> 49 rue du Baerendall >> >> B.P.65 L-8201 Mamer >> >> Téléphone: 31 33 80-407 >> >> Fax: 31 33 80 8-407 >> >> GSM: 621 303 616 >> >> E-mail: cfrider...@netcore.lu >> >> >> >> *From:* ccie_voice-boun...@onlinestudylist.com [mailto: >> ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Miron Kobelski >> *Sent:* mercredi 26 janvier 2011 19:07 >> *To:* ccie_voice@onlinestudylist.com >> *Subject:* [OSL | CCIE_Voice] 3750 QoS: service-policy + mls qos >> trustcommands on the same port >> >> >> >> Hello, >> >> I'm working on Vol2 Lab8 QoS section. Task 5.2 requires to conditionally >> trust DSCP markings from the Cisco IP phone, which can be accomplished with: >> >> mls qos trust device cisco-phone >> mls qos trust dscp >> >> But 5.3 requires policing and remarking using service-policy for the same >> switch port. >> In the Enterprise QoS SRND page 106 we have: >> >> At the time of writing, the Catalyst 2970/3560/3750 does not support a >> trust statement (such as mls qos >> trust device cisco-phone) in conjunction with a service-policy input >> statement applied to given port at >> the same time. While this may be configurable, if the switch is reset, one >> or the other statement may be >> removed when the switch reloads. This limitation is to be addressed; >> consult the latest Catalyst >> 2970/3560/3750 QoS documentation for updates on this limitation >> >> PG's solution seems to ignore this fact. What's your opinion on this? I >> was unable to find anything on this in the archive. >> >> BTW, how can I find QoS SRND via cisco.com documentation portal? >> >> regards >> kobel >> >> >> >> -- >> >> This email was Anti Virus checked. >> >> >
<<image001.gif>>
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com