Hi Stuart- try setting an explicit dial peer for 4158884343 (doing appropiate
xfm in cucm) - if this works the issue could be related to the no
supplementary-service h225-notify cid-update command not taking. I seem to
remember having to reload the gateway on an occassion to get this to work.
hthBrian
From: stuart.geoghe...@ngbailey.co.uk
To: btmulg...@hotmail.com; ccie_voice@onlinestudylist.com
Date: Sun, 25 Sep 2011 20:42:43 +0100
Subject: RE: [OSL | CCIE_Voice] Vol 2 Lab 7 TEHO - phone display issue
Hi Brian/Rogers/All,
thanks for responses
I have tried all combinations of the following - all calls suceed in ringing
4158884343 on the PSTN Line
RP 91415.8884343
called party transformation XXXXXXXXXX as per IPX PG.
dig manipulation on the RL - > call suceeds/ display still remains "TO
914158884343"
RP 9.14158884343
Predot (on the RP) (as per Brian's suggestion)
dig manipulation on the RL - > call suceeds/ display still remains "TO
914158884343"
RP 91.4158884343
Predot (on the RP)
XXXXXXXXXX called party transform mask on the RP
dig manipulation on the RL - > call suceeds/ display still remains "TO
914158884343"
This is using Ver 7 CUCM. I have tried using
a 7961 FW 9-1-1SR1S
a 7965 FW 8-4-1S
I then tried to connect to my work's Lab CUCM - running v8.5 using IP
Communicator and get exactly the same results.
Think i'm going mad or missing something really obvious. Dig Manipulations
works fine, just cannot get the display to change from 914158884343 to
4158884343 when i am trying to manipulate on Route Pattern Level as advised.
Any suggestions
would be appreciated,
Many thanks
Stuart
From: Brian Mulgrew [btmulg...@hotmail.com]
Sent: Friday, September 23, 2011 6:24 PM
To: Geoghegan, Stuart; ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] Vol 2 Lab 7 TEHO - phone display issue
Hi
set rp as 9.14158884343
set cld party xfm on rp as pre. (for TO display)
and set relevant cld party xfm on gwys / rout list for dnis digit manipulation
hth
From: stuart.geoghe...@ngbailey.co.uk
To: ccie_voice@onlinestudylist.com
Date: Fri, 23 Sep 2011 13:43:46 +0100
Subject: [OSL | CCIE_Voice] Vol 2 Lab 7 TEHO - phone display issue
Hi All,
I am working through Vol2 Lab TEHO requirement where we are asked to dial
914158884343 from HQ Phone via the BR1 gateway (H323) as first choice as a
local call. and then the HQ MGCP Gateway as second choice as National call 1 +
10 digits.
I have no issue with the routing of the calls and digit manipulation, however
the question requests
“the caller should see TO 4158884343 regardless of whether the call is sent out
of Br1 & HQ.
I have read the PG and OSL Archives.
I have tried using called party transformations XXXXXXXXXX on the Route Pattern
level & also the RG level. I am definitely sending 4158884343 to both
gateways, however I my display always states “TO 914158884343”.
Previous OSL archives suggest adding the following to the H323 GW
voice service voip
no supplementary-service h225-notify cid-update
I have tried this but this has not changed anything – and also I still have the
same issue via my MGCP gateway.
I have even tried a TP of 914158884343, called party mask of 4158884343, which
then matches a RP of 4158884343 – which again routes correctly but the display
does not change.
Has anyone else encountered this before?
kind regards
Stuart
The information contained in this e-mail (and attachments) is confidential. It
must not be read, copied, disclosed, printed, forwarded, relied upon or used by
any person other than the intended recipient. Unauthorised use, disclosure
or copying is strictly prohibited. If you have received this e-mail in error
immediately contact the sender and postmas...@ngbailey.co.uk then permanently
delete it and any attachments. NG Bailey may monitor email where it is
considered proportionate to any
perceived risk. This email has been sent on behalf of an NG Bailey company, if
in doubt ask the sender to clarify which company. The NG Bailey companies
include NG Bailey Limited (342778), NG Bailey IT Services Limited (2338401), NG
Bailey Facilities Services
Limited (5472032), Kedington (Northern Ireland) Limited (NI 31145) and NG
Bailey Group Limited (1490238). All of the companies, except Kedington
(Northern Ireland) Limited, are registered in England with registered office at
Denton Hall Ilkley West Yorkshire
LS29 0HH. Kedington (Northern Ireland) Limited is registered in Northern
Ireland and its registered office is c/o Carson McDowell, Murray House, Murray
Street, Belfast, BT1 6DN.
_______________________________________________ For more information regarding
industry leading CCIE Lab training, please visit www.ipexpert.com Are you a
CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
