Just a clarification here. voice service voip no supplementary-service h225-notify cid-update <<< command reference implies this is for CallerID updates when in fact it is for Called # updates
The above prevents an H323 GW from updating the Called Number on the Callers phone. So with the following example we can ensure the caller always sees "TO 4158884343". RP: 91415.8884343 - called # mask = 10X's <<<< This is for the display on the callers phone for when the call leaves the BR1 or HQ gateway. RL: br1h323-h1mgcp RG: BR1 - called #: Predot, Prefix 9 <<<< This is to match the local dial-peer in BR1 RG HQ: called #: Predot, Prefix 1415 <<<< This is here to satisfy the HQ Telco requirements. Vik Malhi – CCIE #13890 Managing Partner - IPexpert, Inc. Telephone: +1.810.326.1444 ext 420 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com On Dec 3, 2011, at 8:14 AM, John McGaughey (jomcgaug) wrote: > Hi Stuart, > > I ran into the exact same problem. The answer in the DSG is incorrect. I > got it to work by doing the following. > > I created the following dial-peer on BR1. > > dial-peer voice 415 pots > destination-pattern 415....... > port 1/0/0:23 > forward-digits 7 > > In the teho route list I set the called party transform mask to XXXXXXXXXX > for the BR1 RG. Now I see TO: 4158884343 on the display when the call does > to the BR1 GW. > > “no supplementary-service h225-notify cid-update” is not needed since that is > for calling party, not called party. > > I did leave XXXXXXXXXX in the called party transformation mask in the route > pattern because that is needed for calls going out the HQ MGCP GW. > > HTH > > John > > From: ccie_voice-boun...@onlinestudylist.com > [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Geoghegan, Stuart > Sent: Friday, September 23, 2011 7:44 AM > To: ccie_voice@onlinestudylist.com > Subject: [OSL | CCIE_Voice] Vol 2 Lab 7 TEHO - phone display issue > > Hi All, > > I am working through Vol2 Lab TEHO requirement where we are asked to dial > 914158884343 from HQ Phone via the BR1 gateway (H323) as first choice as a > local call. and then the HQ MGCP Gateway as second choice as National call 1 > + 10 digits. > > I have no issue with the routing of the calls and digit manipulation, however > the question requests > > “the caller should see TO 4158884343 regardless of whether the call is sent > out of Br1 & HQ. > > I have read the PG and OSL Archives. > > I have tried using called party transformations XXXXXXXXXX on the Route > Pattern level & also the RG level. I am definitely sending 4158884343 to > both gateways, however I my display always states “TO 914158884343”. > > Previous OSL archives suggest adding the following to the H323 GW > > voice service voip > no supplementary-service h225-notify cid-update > > I have tried this but this has not changed anything – and also I still have > the same issue via my MGCP gateway. > > I have even tried a TP of 914158884343, called party mask of 4158884343, > which then matches a RP of 4158884343 – which again routes correctly but the > display does not change. > > Has anyone else encountered this before? > > kind regards > > Stuart > > > The information contained in this e-mail (and attachments) is confidential. > It must not be read, copied, disclosed, printed, forwarded, relied upon or > used by any person other than the intended recipient. Unauthorised use, > disclosure or copying is strictly prohibited. If you have received this > e-mail in error immediately contact the sender andpostmas...@ngbailey.co.uk > then permanently delete it and any attachments. NG Bailey may monitor email > where it is considered proportionate to any perceived risk. This email has > been sent on behalf of an NG Bailey company, if in doubt ask the sender to > clarify which company. The NG Bailey companies include NG Bailey Limited > (342778), NG Bailey IT Services Limited (2338401), NG Bailey Facilities > Services Limited (5472032), Kedington (Northern Ireland) Limited (NI 31145) > and NG Bailey Group Limited (1490238). All of the companies, except > Kedington (Northern Ireland) Limited, are registered in England with > registered office at Denton Hall Ilkley West Yorkshire LS29 0HH. Kedington > (Northern Ireland) Limited is registered in Northern Ireland and its > registered office is c/o Carson McDowell, Murray House, Murray Street, > Belfast, BT1 6DN. > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
