Changing defaults is a bad idea by default. People should think twice before doing this.
It's very unconvinient to see extra (totally unuseful) information when you're trying to find a problem. When I'm issuing a "show ip route" command I don't want to see what time source and processor load are. But as far as I could turn this off I'm fine. Just because I can run a script which will turn this "feature" off on all my devices. On Wed, 15 Feb 2012, Preston Chilcote (pchilcot) wrote:
Some folks in TAC are pushing to get "terminal exec prompt timestamp" turned on by default. This would add 2 lines to every command being run. For example: Router#show arp Load for five secs: 4%/0%; one minute: 3%; five minutes: 3% Time source is NTP, 09:43:00.607 PST Wed Feb 15 2012 We'd love to hear what you guys think. Whether it would be annoying, impact operations (maybe scripts you have running), or does anyone use this routinely already? Negative and positive feedback is encouraged. Thanks, Preston Chilcote Cisco TAC _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
-- Dmitry Valdov CCIE #15379 (R&S and SP) _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
