On Wed, 2012-02-15 at 09:46 -0800, Preston Chilcote (pchilcot) wrote: > Some folks in TAC are pushing to get "terminal exec prompt timestamp" > turned on by default. ... > We'd love to hear what you guys think. Whether it would be annoying, > impact operations (maybe scripts you have running), or does anyone use > this routinely already?
We use this on every device that supports it. It has not bothered any of our scripts. IMO a script dependant on information like that not being present is less than optimal. And one could always use "terminal no exec prompt timestamp" to be sure. We also use "terminal monitor" (via line autocommand and with nohangup) everywhere and thus already have scripts do "terminal no monitor". Having a timestamp is a great help in troubleshooting and "forensics". I'd prefer every line to have a timestamp though, including config mode lines. Maybe a counter from the session start postfixed the hostname like this: (just logged in) Hostname[0:00]# Hostname[0:15]#sh int status Load for five secs: 2%/0%; one minute: 2%; five minutes: 2% Time source is NTP, 19:56:38.103 CET Wed Feb 15 2012 ... Hostname[0:17]#conf t Enter configuration commands, one per line. End with CNTL/Z. Hostname[0:19](config)#int gi0/1 Hostname[0:22](config-if)# (et cetera) I'd vote for making it default. Since there are so many other things that need to be pushed via a template it's not really a big deal for us though. -- Peter _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
